Blaupunkt ENDEAVOUR 1001 DVB-T Handbuch Seite 50

What to do if water has got into the PAD?
Turn the PAD NOT on.
1.
Do not press the power button, but disconnect the power cord, so as to eliminate
2.
the PAD. Remove all external devices and send to the PAD to the service center.
Transport the PAD NOT again in the dirty carrying
3.
How do I reset the device to factory settings?
Tap on: Settings---Back up & reset---Factory data reset---Reset tablet---Erase
everything,
How do I increase the battery time?
Adjust the brightness of the touch screen display menu at an adequate level.
1.
Turn down the volume.
2.
Reduce the menu idle time until the unit automatically switches to the idle state.
3.
What to do when the camera is out of focus?
Check that the lens is clean, and clean it if necessary with a soft cloth.
What to do if an error message about the Bluetooth connection appears?
Make sure that the time for entering the password hasn´t been exceeded.
What to do if Bluetooth, Wi-Fi and 3G are disabled?
Verify if the airplane mode is on. If this is the case, can not be activated Bluetooth,
WiFi and 3G.
Downloaded from www.Manualslib.com
to reset the system to factory settings.
manuals search engine
case.
24