Power Adapter / Power On / Off; Connecting The Power Adapter; Enable / Disable Of Pad - Blaupunkt ENDEAVOUR 1001 DVB-T Handbuch

4. Power adapter / power on / off

4-1 Connecting the power adapter

The PAD is equipped with a universal adapter, which is suitable for an input voltage
of 100 V to 240 V.
Perform the following steps to connect the adapter:
1. Plug the charger into the socket provided of PADs
2. Plug the AC adapter into the power outlet.
4-2

Enable / disable of PAD

Press the power button for a few seconds to turn the unit on.
Once the device is powered up, you see the start screen.
Press and release the power button to switch to the standby mode. Press the button
again to activate the unit.
To switch off, press and hold the power button until the pop-up menu appears. Press
OK to turn off the PAD.
Downloaded from www.Manualslib.com
If you go by car, leave your PAD NOT lie in the sun. Make sure that
your device is in the shade and cool.
The Internet connection of your PADs will be interrupted if the
System in the hibernate / sleep mode.
If the system does not respond, you hold the power
about ten seconds to force a power off.
manuals search engine
7