Hensel PRO MIN 1200 AS Bedienungsanleitung Seite 31

HENSEL-VISIT International GmbH
Downloaded from www.Manualslib.com
Damaged cables and cases must be replaced
immediately by customer service.
 Ventilation slots of power packs must be kept free
during operation and sufficient air supply must be
ensured. Do not stick any objects into ventilation slots,
lamp sockets or synchronization sockets. Do not de-
posit any objects (tools, coffee cups, etc.) on the
power pack.

Flash systems must not be used in environments with
explosion hazard. Flammable materials, like furnishing
fabrics, paper, etc. must not be stored in the im-
mediate vicinity of power packs and flash lamps to
prevent fire hazards.
 Power packs must be protected against humidity and
spray water.
 Do not connect accessories from other manufacturers,
even if they use the same or similar connectors.
 Power packs - hanging from pantographs or ceiling -
must be doubly secured against falling down.
 Do not flash into eyes at short distances (smaller than
5 m), because this can lead to eye damage. Do not
look directly into the flash reflector; the flash lamp
could be triggered inadvertently.
 Regularly air closed rooms to prevent build-up of inad-
missible ozone concentrations, which can occur due
to the use of high-powered flash systems.
 During work in the studio generating much dust, the
appliance must be covered with suitable dust pro-
tection (not during operation).
manuals search engine
User manual // Pro Mini 1200 AS Power Pack
31