Headset Led Status - AUDIOLINE BT 103 Bedienungsanleitung

5.2

Headset LED status

Your Bluetootht headset is equipped with a Status LED (refer to Operating
Elements) which indicates the status of the headset.
Power adapter plug is not connected:
Headset status
Headset switched off
Pairing mode
Pairing successful
Standby (no audio connection)
Audio connection established
Note: If your headset is paired with a Bluetootht telephone and no
operation is initiated for approx. 5 minutes, the Status LED is switched
off to save electricity. Press any button on the headset to switch the
Status LED on again whereby it starts to flash.
52
Downloaded from www.Manualslib.com
- Operation -
manuals search engine
LED status
Off
On (continuously)
Flashes fast 10 times
Flashing interval 3 sec, flash duration
0.1 sec
Flashing interval 8 sec, flash duration 2 sec