Pairing A Bluetootht Phone - AUDIOLINE BT 103 Bedienungsanleitung

4.8

Pairing a Bluetootht phone

Before the headset can be used, the pairing process must be completed between
the headset and Bluetootht telephone. Refer to the operating manual provided
with the Bluetootht telephone for further information on this topic. When the
pairing process between the headset and your telephone has been completed,
they subsequently detect each other. The pairing process need not be completed
again. If the pairing information has been deleted from the telephone in the
meantime, pairing must be completed again.
1. Ensure that the headset is charged and switched
off. Make sure that your headset and your
Bluetootht telephone are in close proximity.
2. Press and hold the MF button (1) until the Status
LED lights up continuously. The headset is now in
Pairing mode.
3. Follow the instructions on pairing your Bluetootht phone. Normally, there is
an option in the Setup or Connection menu to scan for Bluetootht devices.
Downloaded from www.Manualslib.com
- Starting Up -
manuals search engine
1
45