Commissioning - HSGM ENGEL 60S Bedienungsanleitung

Commissioning

1
1.
Release the two clamping screws, insert
the soldering tip and tighten the clamping
screws.
3
Press the trigger; the soldering tip is
heated and the solder joint illuminated.
5
Keep the solder on the soldering tip and
apply to the solder joint. After use, pull the
plug out of the socket.
2.
2.
2
Plug into a suitable socket.
4
After 6 seconds, the soldering temperature
has been reached. To check, place the
soldering tip in contact with the solder.
6
Only clean the soldering tip with a viscose
sponge or cloth after use and while still
warm; do not rework the tip.
9
6 sec