Cleaning And Care - KLARSTEN Caldetto Bedienungsanleitung

EN
20
Set time and start time
Press the [00: --] and [--:00] buttons to set the current time. Make sure that the
1
hot water dispenser is turned off.
Hold down the PROG button and press the [00: --] and [--:00] buttons to set
2
the desired start time (AM or PM). Then release the PROG button, the start time
is accepted and the display returns to the current time.
Press the PROG button, the light turns green and the set start time is activated.
Press the button again to cancel the function.
3
Note: You can program both the hot water dispenser and the coffee machine
independently of each other. To display the programmed time, press and hold
the PROG button.
How to empty the Hot Water Dispenser tank
Unplug the appliance and let it cool down completely to avoid the risk of scalding. The
tank must be emptied whenever the appliance is stored or not used for more than a
week. Hold the appliance over a sink and pull down the water drain plug to remove the
water. Replace the plug after emptying.

CLEANING AND CARE

Coffee Maker
• Clean the unit after each use.
• Always unplug the power cord before cleaning.
• Never immerse the housing in water or other liquids.
• Disconnect the coffee machine from the power supply and allow it to cool
completely before cleaning.
• Clean the housing surface with a soft, damp cloth.
• Do not clean the hot plate with abrasive cleaner or steel wool.
• Descale the machine every two months with a commercially available descaler or
a water-vinegar mixture. Fill the water tank with the mixture and let the mixture run
through the machine once. Fill the tank with fresh, clean water up to the MAX mark
and let the water run through as well.
• Clean the glass carafe and funnel with water and dry both parts carefully.
• Remove the spray arm and clean it as well.