Before The First Use; Operating The Coffee Machine - KLARSTEN Caldetto Bedienungsanleitung

EN
18

BEFORE THE FIRST USE

• Before using this unit for the first time, rinse all removable components thoroughly
with warm water.
• Fill the water tank of the coffee machine with cold water up to the maximum water
level indicator.
• Now brew water without coffee powder twice.
• Do the same for the hot water dispenser.

OPERATING THE COFFEE MACHINE

Open the coffee machine container lid and fill the tank with cold water. Do not
1
fill the water above the MAX line.
Place a standard filter in the filter container and add the appropriate amount of
coffee powder depending on the number of cups you wish to brew. Close the
lid.
Note: To avoid overflowing, please use only medium or coarse ground filter
2
coffee for brewing. Do not add too much coffee powder. If the filter container
overflows due to improper handling, please unplug the power cord and let the
coffee in the filter container cool down completely before removing the filter
container.
Place the glass carafe horizontally on the hot plate, making sure that the middle
3
hole in the lid of the glass carafe is aligned with the anti-drip valve.
4 Plug the power cord into the socket. The display will flash [0:00].
If you press the button
intensity: >
with the default setting. In this case the display shows:
5
this setting after the appliance has been started up or set to automatic start,
you must first cancel the operation or automatic start of the appliance and then
change the aroma intensity mode.
Start making coffee by pressing the [I/O] button once. The button illuminates
6
blue and the symbol
unlock the drip stop function.
Press the [I/O] button again to switch off the machine after making coffee. If
you leave the machine switched on, the hot plate will keep the coffee warm for
7
30 minutes after the brewing process is finished. After 30 minutes, the machine
automatically switches off and enters standby mode.
once or several times, you can adjust the aroma
> > . If you do not set this, the appliance operates
flashes on the display. The tank lid must be closed to
. If you want to reset