Activation; Connection Inside The Vehicle - Paj CAR OBD Bedienungsanleitung

2.4 Activation

Note: To activate you need the device ID. Please make a note
In order to use PAJ's CAR OBD Finder 4G, it must first be
activated online.
To do this, please go to
www.start.finder-portal.com
and follow the instructions.

2.5 Connection inside the vehicle

The following points must be observed by all means
The CAR OBD Finder 4G should not be installed near fuel
lines or other combustible components in the engine
compartment.
When mounting the CAR OBD Finder 4G, please make sure
that no other components in the vehicle are damaged.
Installing the CAR OBD Finder 4G may discharge your
vehicle battery. Before connecting, check whether your
vehicle has a discharge protection and retrofit it if
necessary.
Please always observe the manufacturer's specifications
for your vehicle. Compensation claims due to incorrect
connections are hereby excluded
Connect the CAR OBD Finder 4G to the appropriate socket in
your vehicle using the OBD interface. Please make sure that the
CAR OBD Finder 4G is inserted deep enough.
before installing your FINDER.
CAR OBD Finder 4G by PAJ with Online-Tracking V.1.0 EN
© PAJ UG (haftungsbeschränkt)
18