Basic Function - auna multimedia Soundblaster DAB Bedienungsanleitung

EN
Power source
This unit is designed to be operated on AC/DC.
AC operation
Plug the tail of supplied AC power cord into AC socket on unit and the plug
into household AC outlet. The batteries will be automatically disconnected.
This unit is designed in Switched-Mode Power Source with voltage range
from 100V to 240V.
DC operation
Open the BATTERY COMPARTMENT DOOR. Install 8pcs UM-1/D size
batteries (not included) into compartment. Please follow correct polarities
as indicated. NOTE: when using battery, take off the AC cable from unit.
CAUTION: Remove batteries if they are flat or not being used for a long
period of time. Batteries contain chemical substances, so they should be
disposed of properly.

BASIC FUNCTION

Switching on the unit
After connecting the power, press STANDBY button to unit or on remote
control to turn on the unit. Press the FUNC. button on unit or on remote
control to choose TUNER / CD / USB/ SD CARD / AUX/ BT or DAB function.
NOTE: In CD/MP3/USB/SD/AUX/BT mode when the unit is not providing
the main function for 15 minutes, the unit will automatically switch into
standby mode. To turn on the unit again, press "STANDBY" button or replug
the unit.
ESD hints – The product maybe reset or not reset to operation of control
due to electrostatic discharge, just switch off and reconnect again.
Volume adjusting: Rotate the VOLUME knob on unit or press the VOLUME
UP/DOWN key on remote control to increase or decrease volume.
EQ function: This unit has a built-in equalizer system, Press EQ/LIGHT
button on unit or EQ key on remote control while playing to select different
music style (sound tone): FLAT, CLASSIC, ROCK, POP and JAZZ.
ID3 System
This unit has a ID3 system, if the MP3 file is"ID3" format, it will automatically
search the information of "TITLE NAME" "ARTIST NAME" and "ALBUM
NAME" to show on the display. To turn off the show tag system, press the
ID3 key on the remote control, then the unit will back to normal display.
34