Anti-Calc System; Emptying And Storing; Cleaning And Maintenance - h.koenig VIX9 Bedienungsanleitung

Anti-calc system

1. The filter is designed to reduce the build-up of limescale which occurs
du ring steam ironing, this will pro long the working life of your iron.
However, please note that the filter will not completely stop the natural
process of limescales build-up.
2. The filter should be replaced with a new one after 2-3 months, in case of
using one time each day. Working lite of the filter depends on water you
used. Before replace, the filter can still be used continuously. However,
limescales may be most probably built up in steam chamber. This happens
always depending on your local water quality. 1 t is proposed that replace
filter as soon as possible or mix your water with 50% proportion of distilled
water.

Emptying and storing

1. Disconnect the appliance from the power supply and allow the appliance to
cool down for 60 minutes at least.
2. After use, slide out the water tank and pour out all the remaining water.
3. Wind the power cord a round cord storage of the base unit.
4. The iron should be placed on the iron rest plate, lay handle down.

Cleaning and Maintenance

1. Unplug the appliance from the main supply and let the iron cool down.
2. Clean the iron with a damp cloth.
3. Wipe off scale and any other deposits on the soleplate with a damp cloth or
non-abrasive(liquid) cleaner.
4. Never clean the appliance under the tap water.