Safety Notes - wavin DUO 315 Betriebsanleitung

Operating instructions DUO 315
WARNING
1

Safety Notes


RISK OF EXPLOSION! This welding unit must not be used in a gaseous
atmosphere.

RISK OF ELECTRIC SHOCK! Do not open. No user serviceable parts
inside.

Before using, always visually inspect the unit to see that the cables and
connectors are not worn or damaged. Replace the damaged part before
welding.

Switch off and remove the plug from the mains before adjusting, cleaning,
or if the cables are entangled and before leaving the equipment unattended
for any period.

To avoid damaging the unit, do not interrupt the supply voltage or
disconnect the welding cable, while the unit is welding a fitting.

Do not lift or pull the equipment by its cables.

Do not disconnect the welding cables by pulling on them, always pull off the
connectors from the fitting.

Do not start a weld without the pipe correctly inserted into the fitting.

Do not touch the fitting while welding.

Do not weld in the rain or leave the equipment outdoors whilst it is raining.

Weld only in daylight or in good artificial light.

The operator is responsible for accidents or hazards occurring to other
people or their property while using this equipment. Keep the work area
safe!

Keep bystanders a safe distance away from the machine while welding.

Never allow people unfamiliar with these instructions to use the welding
unit.
(05.11)
KS_DUO 315_BA_04_701474600_00.doc
1 Safety Notes
1