Herunterladen Inhalt Inhalt Diese Seite drucken

Start-Up And Operation - Hama QI-FC15S Bedienungsanleitung

Kabelloses ladegerät
Vorschau ausblenden Andere Handbücher für QI-FC15S:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 7
• Do not use the product in areas in which electronic products are not permitted.
• Ensure that the product is not covered up by textiles, metal or other objects in order to
avoid damage caused by overheating.
• Dispose of packaging material in accordance with the locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
• Use the product only for the intended purpose.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct
sunlight.
• As with all electrical products, this device should be kept out of the reach of children.
• Only use the article under moderate climatic conditions.
• Do not use the product in a damp environment and avoid splashing water.
• The product is intended only for use inside buildings.
Risk of electric shock
• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the AC adapter, adapter cable or power cable is damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work
to quali ed experts.
Do not place any bank or similar cards with magnetic strips
or magnetically sensitive objects on the product.
The data on the cards could be damaged or completely deleted.
Warning
Ensure that there are no metal parts (e.g. metal plate for magnetic holders) on the back of
your device. Metal heats up signi cantly in the eld of an induction charger and can damage
your device and/or the charger.

4. Start-up and operation

Warning
• Only operate the product from a socket that has been approved for the device. The
socket must be installed close to the product and must be easily accessible.
• Disconnect the product from the power supply using the On/Off switch – if this is not
available, unplug the power cord from the socket.
• If using a multi-socket power strip, make sure that the total power consumption of all
connected devices does not exceed the power strip's maximum throughput rating.
• If you will not be using the product for a prolonged period, disconnect it from mains
power.
Note
• To be able to charge your device via the wireless charger, it must be compatible with
induction charging technology. For more information, please refer to the operating
instructions of your device.
• Note that mobile phone cases, covers, etc., and other materials between the wireless
charger and the back of your device may interfere with or even prevent the charging
process.
3

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

00187262

Inhaltsverzeichnis