Designations; Safety Instructions; About This Section; Intended Use - Bosch Rexroth LU 2 Montageanleitung

8/54

Safety instructions

Bosch Rexroth AG, MIT: LU 2, 3 842 358 814/2018-12
1.3.3

Designations

This document uses the following designations:
Table 4: Designations
Designation Meaning
LU 2 Automatic lubrication unit from the Rexroth transfer system TS 2plus
LC 2 Oil container for the automatic lubrication unit LU 2
AS 2/... Adapter set for the automatic lubrication unit LU 2
2 Safety instructions

2.1 About this section

This product has been manufactured to be state-of-the-art. Nevertheless, there is
a risk of personal injury and property damage if you do not read this section and
follow the safety instructions in this document.

Read this documentation carefully and completely before you start working
with the product.

Keep these instructions accessible to all users at all times.

Always include them when giving the product to a third party.

2.2 Intended use

The product is an incomplete machine.
You may use the product as follows:
• for installation in a Rexroth transfer system TS 2plus for lubrication of the
transport chain.
• for lubrication of 1 belt section BS 2/... or 1 conveyor unit SE 2/...in the
drive module.
• for operation with 2 equal lubrication pins.
• Ambient conditions, see page 53.
The product is strictly intended for professional use and not for private use.
The intended use also implies that you have read all this documentation and fully
understood it, in particular chapter 2 "Safety instructions".

2.3 Improper use

Any use other than that described in the section "Intended use" is considered
improper and is not permitted.
Bosch Rexroth AG is not liable for any loss or damage resulting from improper use.
The user alone bears any risks associated with improper use.
The following foreseeable misuses also constitute improper use: