Synchronising Several Wireless Receivers; Brightening - Koch FUS5 Bedienungsanleitung

4-channel remote control (FUS5)
2.5

Synchronising several wireless receivers

1
1
2
2.6

Brightening

1
513643-E
for 1-channel remote dimmer (LFDQ)
for 1-channel dual remote dimmer (LTDQ)
all lights will switch to 50% daylight and 50% warm white, and full brightness.
If several wireless receivers are operated at the same time using one remote
control, you may see different brightness levels due to interference on the
transmission paths.
Press and hold the button programmed to the lighting until all connected lights
illuminate.
Briefly press the button once to switch all the lights off.
Using the brightening function (see point 2.6), you can now synchronise the
lights again, thereby setting equal brightness levels
The lighting is switched off.
Press and hold the button programmed to the lighting.
The lighting increases the brightness up to the maximum.
Brightening stops automatically once maximum brightness has been reached.
578185 AN-06687-A/KOC-EL 15