3.
Use
3.1
Use of the remote control
The remote control works through the IR sensors of the green soap segment.
Position the remote control over the IR ring, like Fig. C and D, then the desired settings
can be changed.
Fig. C
3.2
Change dosage soap
Press the «1» button. The faucet shows a green light onto the «Soap» segment.
With the «+» and «-» buttons the amount of soap can be changed. The amount of soap can be
checked by the LED bars onto the display of the faucet. The selected setting is automatically
stored after 10 seconds or when the «2» button is pressed.
3.3
Change dosage lotion or disinfectant
Press the «2» button. The faucet shows a green light onto the «Disinfect» segment.
With the «+» and «-» buttons the amount of lotion or disinfectant can be changed.
The amount of lotion or disinfectant can be checked by the LED bars onto the display of the
faucet. The selected setting is automatically stored after 10 seconds or when the «2» button is
pressed.
3.4
Change initial water temperature
Press the «TEMP» button. The faucet shows a red light at the «+» segment and a green light at
the «-» segment. With the «+» and «-» buttons the initial water temperature can be changed.
The selected setting is automatically stored after 10 seconds or when the «2» button is pressed.
14
Fig. D
7
V 1.0 EN