Herunterladen Inhalt Inhalt Diese Seite drucken
Vorschau ausblenden Andere Handbücher für Legend:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

viscount
Manuale Utente - IT
User Manual - EN
Bedienungshandbuch - DE
Ver. 1.3

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltszusammenfassung für Viscount Legend

  • Seite 1 Manuale Utente - IT User Manual - EN Bedienungshandbuch - DE Ver. 1.3...
  • Seite 3: Inhaltsverzeichnis

    1. Note importanti ..............................2 1.1 Cura del prodotto ..............................2 1.2 Note riguardanti il manuale ..........................2 2. Introduzione ..............................3 2.1 Caratteristiche generali di Legend e Legend Live ....................3 3. Comandi e connessioni ..........................4 3.1 Pannello superiore..............................4 3.2 Pannelli laterali..............................6 3.3 Pannello posteriore.............................
  • Seite 4: Note Importanti

    Manuale Utente 1. NOTE IMPORTANTI 1.1 CURA DEL PRODOTTO Non applicate eccessiva forza alle strutture ed ai comandi dello strumento (manopole, pulsanti, tastiera  ecc…).  Non collocare, quando possibile, lo strumento in prossimità di unità che producano forti interferenze come apparecchi radio –...
  • Seite 5: Introduzione

    Manuale Utente 2. INTRODUZIONE 2.1 CARATTERISTICHE GENERALI DI LEGEND E LEGEND LIVE Legend e Legend Live sono organi digitali a due manuali in grado di simulare, grazie alla nuova tecnologia di generazione sonora (Tonewheel Modeling Technology), tutte caratteristiche dell’organo elettromeccanico più...
  • Seite 6: Comandi E Connessioni

    - nel Legend , del tasto A# della Black Octave (vedi punto 18 del par. 3.2) del manuale superiore. - nel Legend Live , del pulsante [A] nel pannello laterale del manuale superiore (vedi punto 18 del par.
  • Seite 7 - nel Legend , del tasto A# della Black Octave (vedi punto 18 del par. 3.2) del manuale inferiore. - nel Legend Live , del pulsante [A] nel pannello laterale del manuale inferiore (vedi punto 18 del par.
  • Seite 8: Pannelli Laterali

    Manuale Utente 3.2 PANNELLI LATERALI LEGEND LEGEND LIVE 1 2 3 1 4 6 BLACK OCTAVE DEL LEGEND HALF MOON DEL LEGEND NOTA Il pannello Half Moon è rimovibile. IT - 6...
  • Seite 9 Tramite questi pulsanti è possibile configurare l’effetto di riverbero: - [REVERB POST/PRE] (presente solo nel Legend ): permette di selezionare la posizione dell’effetto nella catena del segnale. A led spento corrisponde la modalità POST, tramite la quale la riverberazione viene applicata dopo l’effetto Rotary.
  • Seite 10 - [TONEWHEEL MODEL ‘70]: tipico suono degli anni ’70, utilizzato prevalentemente nella musica progressive, pop e rock. Nel modello Legend Live la selezione si attua tramite i tasti del manuale superiore. Per selezionare il modello desiderato, tenendo premuto il pulsante [TRANSPOSE SELECT], nel manuale superiore premere: F5: corrisponde al modello del pulsante [TONEWHEEL MODEL ‘30] del Legend .
  • Seite 11 Comandi per la selezione dei Preset del manuale superiore (vedi par. 4.2). Il led acceso indica quale Preset è attualmente selezionato. 18. Set A o B nella Black Octave del manuale superiore (nel Legend ) o pulsanti [DRAWBARS SET] (nel Legend Live ).
  • Seite 12: Pannello Posteriore

    11,2 Vpp) per ricevere il segnale elaborato da un processore di effetti esterno collegato al connettore [FX SEND] (vedi punto precedente). Questo segnale viene poi trattato dall’equalizzatore e dagli effetti interni Reverb, Drive e Rotary del Legend / Legend Live ed inviato alle uscite [LEFT], [RIGHT], [ROTARY SPEAKER] e [PHONES] (anche anteriore).
  • Seite 13 - [ANALOG IN]: ingresso di linea per ricevere il segnale da un’unità audio esterna. Questo segnale viene poi trattato dall’equalizzatore e dagli effetti interni Reverb, Drive e Rotary del Legend / Legend Live ed inviato alle uscite [LEFT], [RIGHT], [ROTARY SPEAKER] e [PHONES] (anche anteriore).
  • Seite 14 Manuale Utente - [OUT1] e [OUT2]: da questi connettori vengono trasmessi i dati MIDI generati dal Legend / Legend Live . Collegare questi connettori all’ingresso MIDI del dispositivo ricevente (per es un expander). Nella seguente tabella sono riportati i canali MIDI gestiti dai connettori sopra descritti:...
  • Seite 15: Accensione E Normale Funzionamento

    4. Attendere la sequenza di accensione dei led dei pulsanti posti sui pannelli laterali a sinistra. 5. Una volta accesi i led dell’ultimo tasto nero nella Black Octave (nel Legend ) o dei pulsanti [DRAWBARS SET B] (nel Legend Live ) di entrambi i manuali lo strumento è pronto per essere suonato.
  • Seite 16 Per utilizzare i drawbars del Set A è necessario, per ogni manuale, premere il tasto A# della Black Octave (nel Legend ) od il pulsante [DRAWBARS SET A] (nel Legend Live ). Per utilizzare i drawbars del Set B, premere il tasto B della Black Octave (nel Legend ) od il pulsante [DRAWBARS SET B] (nel Legend Live ).
  • Seite 17: Cosa Sono E Come Si Utilizzano I Presets

    Presets e venivano richiamate tramite la prima ottava della tastiera dotata di tasti a colori invertiti, per questo chiamata Black Octave. Il Legend dispone della Black Octave per ogni manuale e contiene 9 Presets, richiamabili con i tasti compresi dal C# al A.
  • Seite 18: La Percussione

    E’ inoltre possibile regolare il volume della percussione tramite la bascula [PERCUSSION SOFT/NORM] (nel Legend ) od il pulsante [SOFT/NORM] (nel Legend Live ). In NORMAL (led spento nel Legend Live ) il volume è quello impostato con il potenziometro [PERCUSSION VOLUME]. In SOFT (led acceso nel Legend Live ) il volume viene attenuato.
  • Seite 19: Aggiungere I Rumori Interni

    Il riverbero nasce come somma delle varie riflessioni acustiche prodotte da un suono in un ambiente naturale. Negli originali organi elettromeccanici il riverbero era simulato tramite un particolare dispositivo contenente una o più molle. L’effetto Reverb del Legend / Legend Live permette di simulare un riverbero naturale e quello caratteristico dell’organo elettromeccanico.
  • Seite 20: Drive

    ’70. 5.4 ROTARY L’effetto interno Rotary del Legend / Legend Live simula il classico effetto acustico prodotto da un diffusore rotante collegato all’organo. Detto sistema di amplificazione e diffusione del suono si affermò con l’avvento dell’organo elettromeccanico e consisteva in due sezioni, una dedicata ai toni acuti ed un’altra riguardante i...
  • Seite 21: Funzioni Aggiuntive

    Legend / Legend Live permette di simulare anche questa modalità di utilizzo dell’organo. Per attivare la modalità Gospel, tenendo premuto il pulsante [TRANSPOSE SELECT], premere il tasto D1 del manuale superiore.
  • Seite 22: Appendice

    2nd group of drawbars upper (Set B) 2nd group of drawbars lower (Set B) NOTA I Preset 1 e 2 del modello Legend Live corrispondono a quelli richiamabili con i tasti C# e D nel Legend. 7.2 MAPPA DELLE FUNZIONI RICHIAMABILI CON IL MANUALE SUPERIORE NOTA Le funzioni riportate nel disegno sono richiamabili tenendo premuto il pulsante [TRANSPOSE SELECT].
  • Seite 23 Verificare che il/i pedali siano di tipo Nornalmente Aperto (N.A.). Uno o più dei seguenti controlli / effetti sembrano non funzionare. Pedaliera: è impostata in modalità Direct (led del pulsante [PEDALS DIRECT] nel Legend o [PEDALS TO LOWER] nel Legend Live acceso rosso).
  • Seite 24 Smaltimento dei rifiuti elettrici ed elettronici (applicabile nell’Unione Europea e negli altri paesi europei con servizio di raccolta differenziata) Ai sensi dell’art. 13 del Decreto legislativo 25 luglio 2005, n. 151 “Attuazione delle Direttive 2002/95/CE, 2002/96/CE e 2003/108/CE” II simbolo presente sul prodotto o sulla sua confezione indica che il prodotto non verrà trattato come rifiuto domestico.
  • Seite 27 1. Important notes .............................2 1.1 Product care ................................. 2 1.2 Notes about this manual ............................2 2. Introduction ..............................3 2.1 General features of Legend and Legend Live ..................... 3 3. Controls and connections ..........................4 3.1 Upper panel ................................. 4 3.2 Side panels................................6 3.3 Rear panel ................................
  • Seite 28: Important Notes

    User Manual 1. IMPORTANT NOTES 1.1 PRODUCT CARE Do not apply excessive force to the instrument's structures and controls (knobs, buttons, keyboard etc...).   Whenever possible, do not place the instrument close to units that generate strong interference, such as radio - TV sets, monitors, etc ...
  • Seite 29: Introduction

    The Legend, model has inverted colours on the first octave of both manuals, that can be used for the selection of one of the two drawbar Sets or the 9 user editable Presets. The Legend Live model allows the selection of two sets, and two presets for each Manual, through the buttons on the left panel.
  • Seite 30: Controls And Connections

    - Legend: the key A# on the Black Octave (see point 18 of par.3.2) of the upper manual. - Legend Live: the [A] button on the side panel of the upper manual (see point 18 of par. 3.2). For further information on drawbars, read par. 4.1.
  • Seite 31 These controls enable and customise the percussion sound on the upper manual when using the Set B drawbars: - [PERCUSSION ON/OFF] ( Legend ) or [ON/OFF] ( Legend Live ): activate (led on in Legend Live ) and deactivate (led off in Legend Live ) the percussion.
  • Seite 32: Side Panels

    User Manual 3.2 SIDE PANELS LEGEND LEGEND LIVE 1 2 3 1 4 6 LEGEND BLACK OCTAVE LEGEND HALF MOON The Half Moon panel can be removed EN - 6...
  • Seite 33 These buttons control the reverb effect: - [REVERB POST/PRE] (only available in Legend model): select the position of the effect within the signal chain. The POST mode is represented by the led being off; in this mode, the reverb is applied after the Rotary effect.
  • Seite 34 - [TONEWHEEL MODEL ‘50]: typical sound of the '50s and' 60s and is often used in jazz music. - [TONEWHEEL MODEL ‘70]: typical sound of the '70s, mainly used in progressive music, pop and rock. Legend Live, In the model the tonewheel model is selected through the upper manual keys.
  • Seite 35: Rear Panel

    20. Set A and B in the lower manual Black Octave ( Legend ) or [DRAWBARS SET] buttons ( Legend Live ) . Controls for the selection of Sets A and B of the lower manual drawbars (see par. 4.1). The led indicates which Set is currently selected.
  • Seite 36 - [ANALOG IN]: line input for signal from an external audio device. This signal is then modified by the equalizer and the internal effects Reverb, Drive and Rotary of the Legend / Legend Live , then sent to the outputs [LEFT], [RIGHT], [ROTARY SPEAKER] and [PHONES] (also on the front).
  • Seite 37 Legend / Legend Live , with an external expander module). - [OUT1] and [OUT2]: this connectors send out the MIDI data generated by Legend / Legend Live . Connect this port to the MIDI input of the receiving device (e.g. an expander module).
  • Seite 38: Switching On And Normal Functioning

    4. Wait for the power-on sequence of the left side panel buttons’ leds. 5. Once the last led of the Black Octave keys ( Legend ), or of the [DRAWBARS SET B] ( Legend Live ) on both manuals has switched on, the instrument is ready to be played.
  • Seite 39 To use the drawbars of Set A, press the key A# of the Black Octave for each manual ( Legend ) or the button [DRAWBARS SET A] ( Legend Live ). To use the drawbars of Set B, press the key B of the Black Octave ( Legend ) or the [DRAWBARS SET B] button ( Legend Live ).
  • Seite 40: What Are Presets And How To Use Them

    Black Octave for each manual and includes 9 Presets, that can be recalled through the keys from C# to A. Legend Live has two Preset for each manual. To recall them, press the buttons [UPPER PRESETS 1] and [UPPER PRESETS 2] for the upper manual, or [LOWER PRESETS 1] and [LOWER PRESETS 2] for the lower manual.
  • Seite 41: Percussion

    Select the percussion harmonic through the tab [PERCUSSION HARMONIC SELECTOR SECOND/THIRD] ( Legend ) or through the button [2nd/3rd] ( Legend Live ) . In SECOND mode (led off in Legend Live ) the harmonic used by the percussion in the second (equivalent to a 4 'register).
  • Seite 42: Internal Noises Simulation

    In the original electromagnetic organs, the reverb was simulated by means of a special device containing one or more springs. The Reverb effect of the Legend / Legend Live allows you to simulate a natural reverb and the reverb characteristic the electromechanical organ.
  • Seite 43: Drive

    User Manual Legend model) With the [REVERB POST/PRE] button (only available in you can select the position of the effect in the signal chain. In POST mode the led is off; the reverberation is added after the Rotary effect. In PRE mode the led is on;...
  • Seite 44: Additional Functions

    Legend / Legend Live allows you to simulate this organ setting. To activate the Gospel mode, press and hold the [TRANSPOSE SELECT] button, then at the same time press the D1 key on the upper manual. Doing so, the first two Sets on the left control the lower manual, while the two sets to the right control the upper manual.
  • Seite 45: Appendix

    2nd group of drawbars lower (Set B) Presets 1 and 2 of the Legend Live are the same of those called up with the keys C # and D in the Legend. 7.2 MAP OF THE FUNCTIONS RECALLED THROUGH THE UPPER MANUAL The functions shown in the drawing can be recalled by pressing and holding the [TRANSPOSE SELECT] button.
  • Seite 46 One or more of the following controls / effects do not seem to work. Pedalboard: it is set in Direct mode (the led of the [PEDALS DIRECT] button in Legend or [PEDALS TO LOWER] in the Legend Live turns red).
  • Seite 47 Disposal of old Electrical & Electronic Equipment (Applìcable throughout the European Union and other European countries with separate collection programs) Dir. 2002/95/CE, 2002/96/CE e 2003/108/CE This syrnbol, found on your product or on its packaging, indicates that this product should not be treated as household waste when you wish to dispose of it.
  • Seite 49 1. Wichtige Hinweise ............................2 1.1 Pflege des Instruments ............................2 1.2 Hinweise zu diesem Handbuch ........................... 2 2. Einleitung ..............................3 Ausstattungsmerkmale der Legend und Legend Live ....................3 3. Regler und Anschlüsse ..........................4 3.1 Oberes Bedienfeld ............................... 4 3.2 Seitliche Bedienfelder ............................6 3.3 Rückseite ................................
  • Seite 50: Wichtige Hinweise

    Bedienungshandbuch 1. WICHTIGE HINWEISE 1.1 PFLEGE DES INSTRUMENTS Achten Sie darauf, das Gehäuse und die Bedienelemente (Regler, Taster, Tastatur usw.) des Instruments  keinen übermäßigen mechanischen Belastungen auszusetzen.  Stellen Sie das Instrument möglichst nicht in der Nähe von starken Störquellen (Radiogerät, Fernsehgerät, PC-Monitor usw.) auf.
  • Seite 51: Einleitung

    Fußpedal oder andere MIDI-Fußpedale. Ohne Fußpedal können diese beiden Zugriegel mit den ersten beiden Oktaven des unteren Manuals gespielt werden. Bei der Legend sind die Tasten der ersten Oktave beider Manuale farblich umgekehrt. In diesem Bereich kann man eines der beiden Zugriegel-Sets oder die 9 anwenderseitig editierbaren Presets wählen. Beim Legend Live -Modell kann man zwei Sets und zwei Presets für jedes Manual mit den Tastern des linken Bedienfelds...
  • Seite 52: Regler Und Anschlüsse

    Set B regelt den Klang des oberen Manuals. Damit Sie mit diesen Zugriegeln spielen können, muss folgende LED leuchten: - Legend: Taste B (dt. H) der schwarzen Oktave (siehe Punkt 18 von Abs. 3.2) des oberen Manuals. - Legend Live: Taster [B] auf dem seitlichen Bedienfeld des oberen Manuals (siehe Punkt 18 von Abs.
  • Seite 53 Set B regelt den Klang des unteren Manuals. Damit Sie mit diesen Zugriegeln spielen können, muss folgende LED leuchten: - Legend: Taste B (dt. H) der schwarzen Oktave (siehe Punkt 18 von Abs. 3.2) des unteren Manuals. - Legend Live: Taster [B] auf dem seitlichen Bedienfeld des unteren Manuals (siehe Punkt 18 von Abs.
  • Seite 54: Seitliche Bedienfelder

    Bedienungshandbuch 3.2 SEITLICHE BEDIENFELDER LEGEND LEGEND LIVE 1 2 3 1 4 6 LEGEND SCHWARZE OKTAVE LEGEND HALBMOND HINWEIS Das Halbmond-Bedienfeld lässt sich entfernen. DE - 6...
  • Seite 55 10. [REVERB]-Taster. Zur Steuerung des Reverb-Effekts: - [REVERB POST/PRE] (nur beim Legend -Modell): Wählt die Position des Effekts in der Signalkette. Im POST-Modus ist die LED erloschen und der Reverb wird nach dem Rotary-Effekt angewandt. Im PRE- Modus leuchtet die LED und der Reverb wird vor dem Rotary-Effekt angewandt.
  • Seite 56 - [TONEWHEEL MODEL ‘70]: typischer Sound der 70er, hauptsächlich verwendet für progressive Musik, Pop und Rock. Beim Legend Live -Modell wählt man das Profilscheiben-Modell mit den Tasten des oberen Manuals. Um das gewünschte Modell zu wählen, halten Sie den [TRANSPOSE SELECT]-Taster gedrückt und drücken die entsprechende Taste des oberen Manuals: F5: entspricht dem [TONEWHEEL MODEL '30]-Taster bei der Legend .
  • Seite 57 Regler zum Wählen der Presets des oberen Manuals (siehe Abs. 4.2). Die LED zeigt an, welches Preset aktuell gewählt ist. 18. Set A und B der schwarzen Oktave (Legend) oder [DRAWBARS SET]-Taster (Legend Live) des oberen Manuals. Regler zum Wählen von Set A oder B der Zugriegel des oberen Manuals (siehe Abs. 4.1). Die LED zeigt an, welches Set aktuell gewählt ist.
  • Seite 58: Rückseite

    Vpp) empfängt das Signal des externen Effektprozessors, der an die [FX SEND]-Buchse angeschlossen ist (siehe vorherigen Punkt). Dieses Signal wird dann vom Equalizer und den internen Effekten Reverb, Drive und Rotary der Legend / Legend Live modifiziert und über die Ausgänge [LEFT], [RIGHT], [ROTARY SPEAKER] und [PHONES] (ebenfalls auf der Vorderseite) ausgegeben.
  • Seite 59 Wenn die Rotationsgeschwindigkeit mit diesem Pedal gewählt wurde, blinkt die LED des [ROTARY DIRECT]-Tasters ( Legend Modell ) oder [ROTARY CLASSIC / ROCK]-Tasters ( Legend Live ) und zeigt damit an, dass die gewählte Geschwindigkeit nicht mit der aktuellen Position des Steuerhebels am Instrument übereinstimmt (siehe Punkt 21 von Abs.
  • Seite 60 Bedienungshandbuch - [OUT1] und [OUT2]: Dieser Port überträgt die mit der Legend / Legend Live erzeugten MIDI-Daten. Verbinden Sie diesen Port mit dem MIDI-Eingang eines empfangenden Geräts (z. B. Expandermodul). Die folgende Tabelle zeigt die MIDI-Kanäle, die den oben beschriebenen Anschlüssen zugeordnet sind:...
  • Seite 61: Einschalten Und Normalbetrieb

    5. Nachdem die letzte LED der Tasten der schwarzen Oktave ( ) oder der [DRAWBARS SET B]-Taster Legend Live ) zu leuchten begonnen hat, ist das Instrument spielbereit. 6. Stellen Sie die Lautstärke wie gewünscht ein und/oder tragen Sie nötigenfalls Kopfhörer.
  • Seite 62 Um die Zugriegel von Set A zu verwenden, drücken Sie die Taste A# der schwarzen Oktave des jeweiligen Manuals ( Legend ) oder den [DRAWBARS SET A]-Taster ( Legend Live ). Um die Zugriegel von Set B zu verwenden, drücken Sie die Taste B (dt. H) der schwarzen Oktave des jeweiligen Manuals ( Legend ) oder den [DRAWBARS SET B]-Taster ( Legend Live ).
  • Seite 63: Über Presets Und Ihre Anwendung

    über die erste Oktave der Tastatur abrufen, die an den umgekehrten Tastenfarben zu erkennen war und deshalb „schwarze Oktave“ genannt wurde. Die Legend verfügt über eine schwarze Oktave für jedes Manual und bietet 9 Presets, die man mit den Tasten C# bis A abrufen kann.
  • Seite 64: Percussion

    Obertönen einen weiteren simulierten Oberton mit schneller Attack und exponentialem Decay hinzu. Beim Originalinstrument wird Percussion nur erzeugt, wenn das Zugriegel-Set B gewählt ist, und der mit dem 1‘ Zugriegel erzeugte Klang deaktiviert ist, wenn Percussion aktiv ist: Auch die Legend / Legend Live bietet diese Funktionen.
  • Seite 65: Interne Geräuschsimulation

    Mit dem [VIBRATO SWELL ON/OFF]-Schalter ( Legend ) oder [VIBRATO/CHORUS UPPER]-Taster ( Legend Live ) kann man den Klang des oberen Manuals modulieren. Mit dem [VIBRATO GREAT ON/OFF]-Schalter ( Legend ) oder [VIBRATO/CHORUS LOWER]-Taster ( Legend Live ) kann man den Effekt auf das untere Manual und das Fußpedal anwenden.
  • Seite 66: Drive

    Effekts in der Signalkette wählen. Im POST-Modus ist die LED erloschen und der Nachhall wird nach dem Rotary-Effekt hinzugefügt. Im PRE-Modus leuchtet die LED und der Nachhall wird vor dem Rotary- Simulationseffekt angewandt. Legend Live Um beim -Modell den POST-Modus zu wählen, drückt man gleichzeitig den [TRANSPOSE SELECT]-Taster und die G4-Taste auf dem oberen Manual.
  • Seite 67: Weitere Funktionen

    Zugriegel-Schaltungen umgekehrt und die Zugriegel des unteren Manuals auf der linken Seite angeordnet. Mit der Legend / Legend Live kann man dieses Orgel-Setup simulieren. Um den Gospel-Modus zu aktivieren, halten Sie den [TRANSPOSE SELECT]-Taster gerückt und drücken die D1-Taste des oberen Manuals. Jetzt steuern die ersten beiden Sets auf der linken Seite das untere Manual und die beiden Sets auf der rechten Seite das obere Manual.
  • Seite 68: Anhang

    B Zweite Gruppe unterer Zugriegel (Set B) HINWEIS Presets 1 und 2 der Legend Live sind identisch mit denen, die man bei der Legend mit den Tasten C # und D abruft. 7.2 KARTE DER MIT DEM OBEREN MANUAL ABRUFBAREN FUNKTIONEN HINWEIS Die in der Abbildung gezeigten Funktionen lassen sich aufrufen, indem man den [TRANSPOSE SELECT]-Taster gedrückt hält.
  • Seite 69 Einer oder mehrere der folgenden Regler / Effekte scheinen nicht zu funktionieren. Legend Fußpedal: Es ist auf den Direct-Modus eingestellt (die LED des [PEDALS DIRECT]-Tasters bei der Legend Live oder des [PEDALS TO LOWER]-Tasters bei der leuchtet rot). Fußpedal: Prüfen Sie, ob beim Spielen auf dem unteren Manual die LED des [PEDALS TO LOWER]-Tasters leuchtet.
  • Seite 70 Entsorgung von alten Elektro- und Elektronikgeräten (gültig in der Europäischen Union und anderen europäischen Ländern mit separatem Sammelsystem) Dir. 2002/95/CE, 2002/96/CE e 2003/108/CE Dieses Symbol auf dem Produkt oder auf der Verpackung bedeutet, dass dieses Produkt nicht wie Hausmüll behandelt werden darf.
  • Seite 71: Midi-Informationen

    The same type of transfer of information is used to record MIDI sequences. A sequencer can be used to Legend Legend Live record the MIDI data transmitted by the or any other instrument. When these recorded...
  • Seite 72 Manuale Utente MAIN MIDI MESSAGES TRANSMITTED AND RECEIVED BY THE LEGEND / LEGEND LIVE Note On: • 9nH kkH vvH This message is transmitted when a note is played, i.e. when a keyboard key is pressed. Each Note On...
  • Seite 73 LIST OF MIDI CONTROLLERS CC Function Transmitted Received Rotary Direct 0: Off, 127: On. On ch.1 (OUT 1) and 4 (OUT 2) 0-63: Off, 64-127: On. On ch.1 Pedals Direct 0: Off, 127: On. On ch.1 (OUT 1) and 4 (OUT 2) 0-63: Off, 64-127: On.
  • Seite 74 MIDI IMPLEMENTATION CHART Viscount Legend / Legend Live Version: 1.0 Drawbars Organ Date: 19/04/2017 FUNCTION… TRANSMITTED RECEIVED REMARKS BASIC Default 1, 2, 3, 4, 5, 6 1, 2, 3, 4, 5, 6 CHANNEL Changed ******** ******** MODE Default Mode 3...
  • Seite 76 Viscount International S.p.A. Via Borgo, 68 / 70 – 47836 Mondaino (RN), ITALY Tel: +39-0541-981700 Fax: +39-0541-981052 Website: www.viscountinstruments.com...

Diese Anleitung auch für:

Legend live

Inhaltsverzeichnis