Multi-back Topclass 5 in 1
Control panel and display (1a/1b)
NOTE
►
Press the buttons described below
repeatedly to test all setting options.
An acoustic signal is emitted each
time the button is pressed. Pay
attention to the display; it changes
each time the button is pressed.
►
Each combination of programme,
browning level and weight is auto-
matically displayed with the corre-
sponding baking time.
■
: Use this button to select from
the eleven preset programmes. The
set programme appears in the display
under Menu (baking programme 1 -
11).
■
: Use this button to set the weight
of the finished bread. You can choose
between three different sizes:
540g,
set weight is underlined in the display.
■
: Use this button to select one of
three different browning levels for pro-
grammes 1 - 4:
dium,
the baking time in baking programmes
1, 2 or 3
underlined in the display.
■
: Use this button to start the se-
lected programme. To stop the pro-
gramme, press and hold down this but-
ton for approximately two seconds.
26
Downloaded from
www.Manualslib.com
= 680g or
= 900g. The
= light,
= dark. You can also shorten
The set browning level is
manuals search engine
■
/
to increase or decrease the timer of
the appliance in 10-minute steps. Be
aware that the set time indicates when
the baking process is completed. The
maximum possible setting is 15 hours.
Example: the timer displays 6:30.
These buttons are also used to set the
baking time for menu 10.
After connecting the appliance to the pow-
er supply, the basic setting (1b) appears in
=
the display.
The individual phases of the baking pro-
gramme are listed on the right and left of
the display. After pressing the
a triangle on the left or right of the display
indicates the current phase of the baking
= me-
programme.
BEEM - Elements of Lifestyle
: Use these buttons
That means that the baking
process will be completed
in 6 hours and 30 minutes.
If you start the programme
with the
button, the
timer runs backwards. The
bread will be baked in 6
hours and 30 minutes.
button,
EN