Werbung
Start Building
To begin your model, find step number
and follow the numbers. Each piece has its
own shape and color. Look at the pictures,
find the pieces that match what you see, and
connect them together. It helps to face your
model in the same direction as the instructions
while you build. The arrows show you where
the parts connect, but not all connection points
have arrows. The faded color parts are the
ones you have already put together.
Connectors
You can slide these special connectors together.
Push tightly until you hear a "click". Pay close
attention to the instructions and position them
horizontally or vertically exactly as shown.
Sound Brick
Push the button to play
sounds affects.
Downloaded from
www.Manualslib.com
1
1
2
1
Driver Assembly
Pull-Back Motor
CAUTION: Keep hands, face, hair,
and clothing away from all moving
parts. Toy will go in the direction of
the arrow on the motor. Roll wheels
backwards and wind-up motor until
you hear a clicking. Then release.
Do not over wind.
manuals search engine
Battey Information
WARNING: As with all small batteries, the batteries used in this toy should be kept away
!
from small children, who still put things in their mouths. If they are swallowed, promptly see
a doctor and have the doctor phone 202-625-3333 collect (US only).
CAUTION: Do not dispose of batteries in a fire; they could leak or explode and cause injury.
• Make sure batteries are inserted correctly and follow the toy and battery manufacturer's
instructions. Insert batteries with correct polarity (+/-). • Do not mix new and used batteries. Do
not mix different types of batteries; do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries. • Only batteries of the same or equivalent type recommended
should be used. • Re-chargeable batteries are not recommended. Remove rechargeable
batteries before recharging; they must be charged only under adult supervision. • Non-
rechargeable batteries must not be recharged. • Remove exhausted batteries from the toy;
do not short circuit supply terminals. Remove all batteries if the toy is not used for a long
period of time. • Help the environment by disposing of your product and packaging responsibly.
• The wheelie bin symbol indicates the product and batteries must not be disposed of in the
domestic waste as they contain substances which can be damaging to the environment and
health. Please use designated collection points or recycling facilities when disposing of the
item or batteries. • Keep component free of dust; do not get wet.
Parts List
Before you start building, be sure to compare the parts in
your set with the parts listed here. If anything is missing,
call or write to us using the information on the back cover.
Sound Brick
CAUTION: Do not use close to your ear! Misuse may cause
damage to hearing. • The sound brick comes with 3 batteries al-
ready installed. • Remove screw. Insert 3 button cell (1.5v) bat-
teries (LR44 or AG76) matching the (+/-) as shown. • If sound is
not working, check to see if you have fresh button cell batteries
and that they are installed properly.
FCC Statements: WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for the compliance could void the users right to operate the equipment.
This device (Sound Brick) complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1. This device may not cause harmful interference and 2. This
device must accept any interference received, including interference that may cause undesired
operation. This model is tested to comply with FCC standards - FOR HOME OR OFFICE USE.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy, and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase
the separation between the equipment and receiver. (3) Consult the dealer or an experienced
radio/TV technician. This Class B digital apparatus complies with Canadian ICES-003.
3
Werbung
