Orion COBALT CO104S Bedienungsanleitung Seite 9

Series/Parallel - 4 Speakers (Single 4 Ohm Coils)
4 single 4 ohm voice coil subwoofers with the voice coils of each pair of speaker wired
in series and then all 4 speakers wired in parallel to result in a 4 ohm load on the
amplifier.
1
Figure 5
Figura 5
Abbildung 5
1. Connect the negative (-) terminal from speaker 1 to the negative terminal on
speaker 3 and then hook that wire to the negative (-) terminal on the amplifier.
2. Connect the positive (+) terminal from speaker 1 to the negative (-) terminal on
speaker 2.
3. Connect the positive (+) terminal from speaker 3 to the negative (-) terminal on
speaker 4.
4. Connect the positive (+) terminal from speaker 2 to the positive (+) terminal on
speaker 4 and then hook that wire to the positive (+) terminal on the amplifer.
© 2012 MD Audio Engineering—all rights reserved
Downloaded from www.Manualslib.com
_
_
4 ohm
2
+
+
manuals search engine
_
4 ohm 4 ohm
3
+
+
_
_
4 ohm
4
+
7