Orion COBALT CO104S Bedienungsanleitung Seite 7

One Speaker (4 ohm voice coil)
One 4 ohm voice coil woofer results in a 4 ohm load to the amplifier.
Figure 3
Figura 3
Abbildung 3
1. Connect the speaker by connecting the positive (+) terminal of the woofer to
the positive (+) terminal on the amplifier. Wire the negative (-) terminal of the
woofer to the negative (-) terminal on the amplifier.
© 2012 MD Audio Engineering—all rights reserved
Downloaded from www.Manualslib.com manuals search engine
_
4 ohm
+
+
_
5