What To Do If - AEG HK854400FS Benutzerinformation

26

What to do if...

WHAT TO DO IF...
Problem
You cannot start the appliance
or operate it.
A sound operates when the ap-
pliance is off.
The residual heat indicator
does not come on.
Heat setting alternates
A sound operates and appli-
ance starts and stops again. Af-
ter 5 seconds one more sound
operates.
comes on
comes on
and number come on.
comes on
Possible cause and remedy
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• There is water or fat stains on the control panel. Clean the
control panel
• Start the appliance again and set the heat setting in 10 sec-
onds.
• The child safety device or key lock or Stop+Go operates. See
the chapter Operating the appliance.
You covered one or more sensor fields. Uncover the sensor fields.
The cooking zone is not hot because it operated only for a
short time. If the cooking zone is supposed to be hot, speak to
the After Sales Service.
The Power management is active. See the section Power man-
agement.
You covered . Uncover the sensor field.
• The automatic switch-off operates. Stop the appliance and
start it again.
• Overheating protection for the cooking zone operates.
Switch off the cooking zone. Switch on the cooking zone
again.
• No cookware on the cooking zone. Put cookware on the cook-
ing zone.
• Not correct cookware. Use the correct cookware.
• The diameter of the bottom of the cookware is too small for
the cooking zone. Move cookware to a smaller cooking zone.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical system of the
house. Connect again. If
sales service.
There is an error in the appliance, because a cookware boils dry
or you use not correct cookware. Overheating protection for
the cooking zone operates. The automatic switch-off operates.
Switch off the appliance. Remove the hot cookware. After ap-
proximately 30 seconds switch on the cooking zone
again. should disappear, residual heat indicator can stay.
Cool down the cookware and check it with the section Cook-
ware for the induction cooking zone.
comes on again, speak to the after