Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The LEDs located on the top of the powerstation
will blink when charging; after 30 seconds the lights
will turn off. Press the status indicator button before
you disconnect to make sure the powerstation is
fully charged.
Charging your device using the powerstation mini
You will notice there is no output cable included with
the powerstation. That's because the powerstation
has a "BYOC" (bring your own cable) policy. This way,
the powerstation can play with whichever device
and connector you have, without being limited to
what we choose to ship it with.
To charge your device, plug the Standard USB end of
your device's cable into the powerstation. Plug the
other end of the cable into your device. Your device
will begin charging immediately.
Checking the powerstation's charge status
You can check the amount of juice your powerstation
has by pressing the status indicator button on its side.
There are 4 status LEDs. When you press the button
the LEDs will illuminate for several seconds. Four
LEDs means that the powerstation is fully charged,
while one LED means that it's almost empty.
7
Werbung
