Werbung
Acro Wot Foam-E Instructions / Acro Wot Foam-E Anleitung
Radio Installation
The Acro Wot RTF is supplied with a factory installed S-FHSS receiver and high quality 2.4GHz transmitter. The
transmitter and receiver are compatible with Futaba 2.4GHz S-FHSS radio systems such as the 6J, 8J and 18MZ.
The receiver is supplied bound to the transmitter, but should you need to re-bind it (or bind to another transmitter),
please follow the instructions on the previous page.
The Acro Wot RTF is supplied with a
factory installed S-FHSS receiver and
high quality 2.4GHz transmitter. The
transmitter and receiver are compatible
with Futaba 2.4GHz S-FHSS radio
systems such as the 6J, 8J and 18MZ.
The receiver is supplied bound to the
transmitter, but should you need to
re-bind it (or bind to another
transmitter), please follow the
instructions on the previous page.
Stage 16 / Schritt 16
Connect the aileron servos to your receiver, using the
Y lead supplied, then fit the wing by sliding the leading
edge tongue and pegs into the moulded mount in the
fuselage.
Verbinden Sie die Querruderservos mit Ihrem
Empfänger, dann schieben Sie den Flügel mit dem
Zapfen in die Aussparung im Rumpf.
Stage 17 / Schritt 17
Ensuring that the aileron servo leads are not trapped
between the wing and wingseat, secure with the wing
mounting bolt supplied.
Stellen Sie sicher, dass die Servokabel im Rumpf liegen
und nicht zwischen Fläche und Rumpf eingeklemmt sind.
Danach schrauben Sie den Flügel mit der mitgelieferten
Schraube fest.
8
Power Indicator
Throttle Trim
Channel 5 Switch
Throttle
Rudder
Rudder Trim
On / Off Switch
RTF
Elevator Trim
Total Flap Adjustment
Channel 6 /
Flap Switch
Elevator
Aileron
Aileron Trim
Servo Reversing Switches
Werbung
