Installing The Device; Basic Operation; Mixing Nutrient Solution; Start Growing Your Plants - Bosch SmartGrow Life MSGP3L Gebrauchsanleitung

en Basic operation
Tip: We recommend combining
plants that take the same time to
grow. The growth time lines are
shown on each pack.
Visit our website to access the
following content:
¡ the app for your new device (avail-
able depending on the country)
¡ over 50 new and exciting plant
varieties
¡ additional height modules and
other accessories
¡ more tips, tricks and all information
about your new device
www.bosch-home.com/
smart-indoor-gardening

Installing the device

Insert the device plug in the dock-
1.
ing unit.
→ Fig.
4
Place the docking unit on a stable
2.
and level surface.
→ Fig.
5
26

Basic operation

Basic operation
Basic operation

Mixing nutrient solution

Add 1 measuring spoon (2 g) of
▶
nutrients to 1 litre of fresh tap wa-
ter.
→ Fig.
6
Notes
¡ Always seal the nutrient pack so it
is airtight.
¡ Always use the nutrients in the mix-
ing ratio specified. Do not add any-
thing else, e.g. fertiliser.

Start growing your plants

Place the water bowl on the dock-
1.
ing unit.
→ Fig.
7
Pour 1 litre of prepared nutrient
2.
solution into the water bowl.
→ Fig.
8
Fit the anti-spill ring , the water-
3.
ing tray and the plant tray ⁠ .
→ Fig.
9
Unpack the plant capsules and
4.
separate them using scissors.
→ Fig.
10
Carefully remove the cover film
5.
from the plant capsules so the
seeds do not fall out or stick to the
film.
Insert the plant capsules in the
6.
openings.
→ Fig.
11
Always fill all 3 openings.
Place the light unit on the docking
7.
unit.
→ Fig.
12