Initial Start - „Quick Weighing; Start Measurement - Smart Lab scale Bedienungsanleitung

Initial Start - „quick weighing"
Use the smartLAB
® scale Bathroom Scale to measure your weight. Do not
move, stand still and stand on both legs. The scale will turn on automatically
when stepping on it. The scale starts measuring immediately, a beep tells
you the end of the measurement and finally shows your body weight on the
display. Now you can step off the scale. The scale will deactivate automatically
after several seconds.
Start Measuring
Select Measuring Unit
With batteries correctly installed, press the "UNIT" button on the back of the
scale to select the measurement unit. The default measurement unit is "kg".
You may press "UNIT" button to choose among kilogram and pound.
Daily Measurement
Thanks to the SENSE ON patent technology, the scale will automatically turn
on when you step on the platform.
Stand still and keep full contact with the scale until the LCD displays the
weight and the unit stops blinking. A beep will let you know when the
weighing is done. The scale will turn off automatically after a few seconds.
25