MAXXMEE BK-2703 Gebrauchsanleitung Seite 21

Pore Cleaner Pro
from the middle of the face outwards. Do
not move it backwards and forwards along
the same line. Repeat the process if neces-
sary. Any acne spots should be vacuumed
briefly before the pore attachment is quickly
removed again. Do not move sideways!
4. You can repeatedly press the M button (10)
to increase the intensity level if necessary.
There are three levels. The activated level is
shown on the display (11).
5. After the treatment, switch off the device
using the
6. Remove the pore attachment and clean it.
Microdermabrasion
1. Place the microcrystalline attachment (6) on
the suction head (7).
2. Press the
switches on.
3. When treating the face, start at the chin and
work your way up to the forehead. Slowly
move the microcrystalline attachment in
straight lines from the middle of the face
outwards. Only pull in one direction and do
not press on the device!
4. You can repeatedly press the M button (10)
to increase the intensity level if necessary.
There are three levels. The activated level is
shown on the display (11).
5. After the treatment, switch off the device
using the
6. Remove the microcrystalline attachment and
clean it.
Stimulating Blood Flow in the Skin
1. Place the oval attachment (4) on the suction
head (7).
2. Press the
switches on.
3. Any areas where wrinkles form (e.g. around
the mouth) should be vacuumed briefly be-
fore the oval attachment is quickly removed
again. Do not repeat too often in one loca-
tion – this could lead to blotches!
On / Off button.
On / Off button (9). The device
On / Off button.
On / Off button (9). The device
EN
21