Description Of The Device; Operation; Energy Saving Tips - Coca-Cola Mini Fridge F15 Bedienungsanleitung

Cool Can10
The cooling device always cools with maximum cooling capacity.
5.1

Description of the device

Connection sockets and control panel (rear of the device):
Item in
Designation
fig. 2, page 4
1 AC voltage socket
2 DC voltage socket
3 Mode switch
4 LED "HOT" (red): indicates heating mode
5 LED "COLD" (green): indicates cooling mode
6 ECO switch (only Mini Fridge F 15, Mini Fridge 25)
7 Voltage selector switch (only Mini Fridge 25, Cool Can 10)
6

Operation

I
NOTE
 Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for
hygienic reasons (please also refer to the chapter "Cleaning
and maintenance" on page 13).
 A few water drops may form inside the cooler if it has been
cooling for a lengthy period. This is normal because the mois-
ture in the air condenses to water when the temperature in the
cooler falls. The cooler is not defective. Wipe it out with a dry
cloth if necessary.
6.1

Energy saving tips

 Choose a well ventilated location which is protected from direct sunlight.
 If you want to set an increased energy efficiency and a limited cooling
capacity for the cooler device, use the device's ECO mode.
 Allow warm food to cool down first before placing it in the cooling device
to keep cool.
EN
11