Indel Webasto Marine BI 29 Dual Installations- Und Wartungsanleitung Seite 32

Warranty
Essential information for determining whether the case is covered by the warranty:
• Product code (indicated on the product label)
• S/N (serial number) (indicated on the product label)
• Invoice or sales receipt (or possibly registration document, see above in Validity
period section)
• Detailed description of the defect (Attach photos if possible)
• Description of installation with particular attention to ventilation and wiring (At-
tach photos if possible)
(If it is determined that the case is not covered under warranty, the customer must
pay all expenses for repairs, replacements, labour, travel of persons and transport.
IWM is not required to bear any expense.)
Operating procedures to be applied once it is ascertained that the case is covered
by warranty:
Warranty repair of products installed in boats must be performed exclusively by
service centres (CAT) that are part of the IWM network (see list at www.indelwebas-
tomarine.com). IWM does not cover costs for service performed by others.
For products installed on boats, an IWM authorised CAT technician will come to the
boat if it is located at a distance of maximum 100km from the CAT. IWM shall cover
the cost of this transfer. If the boat is over 100km away, the customer can choose
whether to pay the cost of the technician's transfer (in this case paying the technician
directly), or to move the boat closer.
To locate the nearest service point and for travel coverage terms in the USA, please
contact Indel Webasto Marine USA.
IWM does not reimburse any expense for spare parts purchased elsewhere.
Products installed on Recreational vehicles (RV):
Warranty repairs must be performed exclusively by service centres that are part of
the Webasto network.
The vehicle must be brought to the service centre.
Find the service centre nearest to you at www.webasto.com
For the condition of products installed in recreational vehicles in the USA, please
contact Indel Webasto Marine USA.
31