Mophie powerstation PRO Bedienungsanleitung Seite 7

Charging your device using the powerstation
We've included a USB A to micro USB cable. You can
use this cable to charge the powerstation, or, use it
backwards to charge any micro-usb device. Chances
are, if it's not Apple, its micro-USB. If you're device isn't
micro-USB – you'll have to bring your own cable to
the party. This way, the powerstation can play with
whichever device and connector you have lying
around, not limited to what we choose to ship it with.
In order to charge your device, you will need to have
a USB cable compatible with your device. These come
standard with all Apple products as well as most other
smartphones, tablets and MP3 players.
Checking the status of the powerstation
You can check the amount of juice your powerstation
has by pressing the button on the side of the device.
There are 4 total LEDs. When the button is pressed
the LEDs will illuminate for several seconds. Four
LEDs means that the powerstation is fully charged
and one LED means that it's almost empty.
To keep your powerstation operating to its fullest
potential, make sure to do the following:
1. Keep your powerstation dry and away from
moisture and corrosive materials.
7