Laica myLAICA Anleitungen Und Garantie Seite 9

Instructions and warranty
DECLARATION OF CONFORMITY
Filtration systems produced by Laica are compliant with
the following standards:
- Ministerial Decree no. 174 of 6/04/2004, regulation
concerning materials and objects that can be used
in fixed systems for the capture, treatment, supply
and distribution of water intended for human
consumption.
- Legislative Decree no. 31, 2nd February 2001,
implementation of Directive 98/83/EC regarding the
quality of water intended for human consumption.
- Regulation 1935/2004/EC regarding materials in
contact with food.
- Regulation (EU) 10/2011 regarding plastic materials
and objects intended to come into contact with food.
- Ministerial Decree no. 25 of 07/02/2012 (ITALY),
technical provisions concerning equipment designed
for the treatment of water intended for human
consumption.
- Italian Ministerial Decree of 21 March 1973 and
subsequent amendments on hygiene requirements of
packages, containers and tools destined to come into
contact with food or substances for personal use.
Attention: this
regular periodic maintenance in order
to guarantee the potability requirements
of the treated drinkable water and
maintenance of the improvements as
declared by the manufacturer.
PREPARATION OF THE myLAICA™ FILTER WATER
BOTTLE
1) Before proceeding with the following operations,
wash hands thoroughly.
2) Wash the safety cap, filter cap and water bottle with
cold running tap water and washing-up liquid. Check
that all the detergent has been rinsed off before
continuing. Pay particular attention to the silicone
air venting tube fitted in the filter cap. Rinse it under
running water for 1 minute and leave to dry.
PREPARATION OF FAST DISK™ FILTER
Take the filter out of the bag (fig. 1).
1) Rinse the filter under cold drinkable tap water for
about 30 seconds.
2) Insert the filter in its slot in the cap, pressing lighting
and turning it in a clockwise direction (fig. 2).
SMART FILTRATION SYSTEM – FREE LAICA HOME
WELLNESS APP
USE
List of compatible devices:
• iOS: iPhone with version 10 operating system.
• For devices with Android™ operating system:
from version 6.0 (Marshmallow).
By adding the FAST DISK™ filter to the free "Laica Home
Wellness" app, you can receive automatic notification on
your smartphone when to replace the filter.
1. Install the free "Laica Home Wellness" app on your
smartphone.
2. Start the app and enter the "WATER FILTRATION"
3. Add the FAST DISK™ FILTER by pressing the "+"
4. The app adds the filter and automatically prompts the
5. Save the settings by pressing the "
6. When the filter replacement date is reached,
equipment requires
USE OF FILTER SYSTEM
1. Unscrew the water bottle filter cap and place it on a
2. Fill the water bottle with cold tap water up to the
3. Close the water bottle by screwing on the filter and
4. Unscrew the safety cap and drink the desired quantity
The water bottle has a patented system which prevents
the water from accidentally leaking through the air vent
valve.
The filtered water may not flow freely out of the water
bottle, so it may be necessary to suck it slightly.
For best performance of the water bottle, it is
recommended not to filter more than 4 litres per
day (making sure to wait for a few minutes between
filtrations). Replace the filter after every 120 litres/30
days of filtration (compliance with this indication will
guarantee maximum efficiency and safety of the product).
REPLACING THE FAST DISK™ FILTER
To replace the filter, remove the filter cap from the water
bottle, turn the filter anti-clockwise and remove it by
pulling it upwards (fig. 4).
Replace it with a new one, repeating the steps described
in the paragraph "PREPARATION OF FAST DISK™
FILTER".
9
section from the main screen.
key. You can add the filter by scanning the QR code
printed on the filter bag or manually by pressing the
"Manually select" key.
replacement date. To optimise the effective duration
of the filter based on the water treated, you can select
the chlorine level in your water supply.
To use it properly, request further information
from your water supplier or carry out a
preliminary assessment of the local water
supply.
the notification to replace it will appear on your
smartphone. The notification is also sent to the email
address given during registration.
• To scan the QR code printed on the filter
bag, you must allow the app to access your
smartphone camera.
• To receive notifications when to replace the
filter, you must enable the settings on your
smartphone.
• To replace the filter, you can add a new filter
by scanning the QR code printed on the bag
or update the expiry date by clicking on the
key "Filter expired (click to replace)".
clean surface (e.g. a plate).
desired level, but no higher than the maximum fill line
as indicated in fig. 3.
safety caps.
of water: instant filtration takes place as you drink.
EN
" key.