Safety Instructions - Hama 00062721 Bedienungsanleitung

00062721bda
• Switch on the Bluetooth function.
• Select the tab "Paired devices" and navigate to the
switch item "Options". Select "Newly paired dev."
(Newly paired devices) in the menu that appears.
• The search window opens. After a brief search
period the system finds and recognises the
Bluetooth GPS receiver as "BTG-7000". Select this
device.
• Once you have selected the Bluetooth device you
will be required by the system to enter the access
password for the Bluetooth GPS receiver. It is
"1234".
Downloaded from www.Manualslib.com
06.03.2006 16:02 Uhr
manuals search engine
Seite 21
Enter this password in the field and confirm your
entry with "OK".
• The password will be checked, the pairing is started.
• If this message appears then the Bluetooth GPS
receiver is correctly connected with the mobile
phone.
Important: Depending on the manufacturer, pairing may
be handled differently by other brands and models.
Please refer to the manufacturer's manual for more
information.

6. Safety Instructions:

• Please pay close attention to traffic when driving,
and only make any necessary adjustments to the
GPS receiver or, respectively, your PDA/mobile
phone/notebook, once the vehicle has been parked
and shut down.
• Only use the supplied car recharge cable or the 230V
power supply unit. Using another recharge cable or
power supply unit could cause irreparable damage
to the product or cause severe personal injury.
• Keep away from any sources of moisture and avoid
dusty environments.