Ivt Bluesoleil Software - Hama 00062721 Bedienungsanleitung

00062721bda

3.2 IVT BlueSoleil software

Start the Blue Soleil software and the pairing mode of
the GPS receiver.
• Start the search for Bluetooth devices within range
by clicking on the "red dot" in the middle of the
screen. The Bluetooth GPS receiver is recognised by
the system as "BTG-7000".
• To have the Bluetooth GPS receiver search for
available profiles, double-click on the GPS receiver
icon. After the profiles have been sought, activate
the SPP profile. The SPP icon is the 3rd icon in the
profile bar .
Downloaded from www.Manualslib.com
06.03.2006 16:02 Uhr
manuals search engine
Seite 16
• Once you have selected the SPP profile you will be
required by the system to enter the Bluetooth
password. It is: "1234". Confirm your entry by
clicking on OK.
• This message also contains the virtual COM
connections with which the Bluetooth GPS receiver
is connected to the PC. You need these COM
connections in order to integrate the GPS receiver
into your navigation program.
• If the pairing with the GPS receiver has been
successfully completed then the SPP profile icon
and the GPS receiver must be shown in the program
window in green.