Accessing The Camera; Changing The Camera Settings - Sanyo VA-82LAN Installationsanleitung

3. Flow of Camera Operation through to Network Operation
Perform the following procedures according to the detailed instructions given in the INSTRUCTION MANUAL [VA-82LAN] contained in the supplied
CD-ROM.
1 Installing the "H.264 Plug-in" from the supplied CD-ROM onto PC

2 Accessing the Camera

Enter your user name and password, and then select a language you want to display on the screen.
User name: admin
Password: admin
3 Monitoring The Live Video In The Main Screen
4 Selecting the Operating Conditions
Using the [MAIN SETTINGS] screen for an administrative user, configure the detailed settings for administration.
When you access the camera for the first time, be sure to perform the settings on the [CLOCK SETTINGS] screen.

5 Changing the Camera Settings

Changes in the camera settings can be made through the network connection.
MEMO: • After you turn on the power, wait approximately one minute before network connection is established.
• When the TCP/IP settings on your PC are required, refer to page 5 of the INSTRUCTION MANUAL [VA-82LAN] contained in the
supplied CD-ROM.
8
5
5
5
5
Refer to
3
7
9
15
41