Configuring The Network Settings - Sanyo VA-82LAN Installationsanleitung

2. Configuring the Network Settings

On the NETWORK SETTING screen, specify the options required for connecting the camera to the network (LAN).
• The NETWORK SETTING screen appears only when the camera is equipped with this option board.
• For displaying the menu screen, refer to the instruction manual supplied with the camera.
• In the following instructions, the lever operations of the system controller (VSP-9000) are shown using xy for vertical operation and vw for horizontal
operation.
Menu screen
CAMERA
LENS
PAN/TILT
AUTO MODE
PASSWORD
LANGUAGE
OPTION
ADVANCED MENU
Use the lever (xy) to select "OPTION".
1
Use the lever (xy) to select "IP ADDRESS", use
the lever (vw) to select the IP address assignment
option, and press the [ENTER] button.
NETWORK SETTING
IP ADDRESS
PORT
ALARM
MAC ADDRESS
08-00-7I-81-25-J2
FIX : Manual assignment (default: 192.168.0.2)
2
Go to step
AUTO : Automatic assignment (DHCP)
Confirm the information in the screen, and go to step
4
.
MEMO: The "MAC ADDRESS" cannot be changed.
SET y
y ENTER
SET
SET y
SET y
SET y
SET y
SET
y
SET
y
Use the lever (xy) to select "NETWORK".
FIX y
00080
R
ENTER
OUT1/2
(IP ADDRESS SETTING).
OPTION screen
OPTION
ENTER
INFORMATION SET y
AUTO FLIP OFF
NETWORK SET y
2
Use the lever (xy) to select the setting item you
want to change, and press the lever to the right
(vw).
ROnly the selected option is displayed on the screen, and "x"
appears below the address.
NETWORK SETTING screen
NETWORK SETTING
IP ADDRESS FIX y
PORT 00080
ALARM OUT1/2
MAC ADDRESS
08-00-7I-81-25-J2
Perform the network settings.
IP ADDRESS SETTING
IP ADDRESS
192.168.000.002
SUBNETMASK
255.255.255.000
GATEWAY
192.168.000.001
IP ADDRESS SETTING
IP ADDRESS
192.168.000.002
x
5