Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Downloaded from
www.Manualslib.com
00020898bda
2.2 Connecting the mini USB receiver / connecting mouse and receiver
a) Connect the mini USB receiver to a free USB connector at the PC.
b) If your computer is switched off, switch it on and wait until it has started up.*
c) The receiver is now detected by the Windows operating system and the
required drivers are automatically installed.
d) Press now the connecting button at the receiver for a short time
(maximally 1 second), afterwards the one at the mouse**.
*The mini USB receiver can be connected when the PC is switched off or on.
** If the connecting button is pressed for more than 2 seconds, the mouse switches
off. See point 5.
• The mouse works now as a standard 3-button mouse. You have to install the
enclosed software if you want to assign a certain function to the third (wheel)
button.
3. Software Installation
• Uninstall the mouse software which is eventually already installed.
• The software supports Windows 98/ME/2000/XP/Vista/Windows7.
a) Insert the enclosed CD in your CD-ROM or DVD-ROM drive. Wait a moment,
the installation starts automatically. If this is not the case, click on Start =>
Run, enter "X:\Mouse/Setup" ("X" stands for the drive letter of your CD-ROM
drive) and confirm with Enter.
b) Select the desired language and click on "Next".
c) Restart your PC to terminate the installation.
d) After a successful installation, the mouse symbol
manuals search engine
11.08.2009
8:08 Uhr
Seite 8
Connecting button
Connecting button
appears in the task line.
Werbung
