Hama 00102146 Bedienungsanleitung Seite 7

Downloaded from www.Manualslib.com
g Operating instruction d Bedienungsanleitung
Package contents:
• USB printer converter
• Printed guide
• Package slip with disposal instructions
Safety instructions:
During operation, keep the device away from
heaters and radiators as well as extremely dusty
or damp areas.
Installation on Windows Vista 32-bit editions
Because Windows Vista already includes the
necessary drivers, you do not need to install any
drivers separately. After you have inserted the
USB printer converter into your computer and
restarted Vista, the computer recognizes and
installs the converter after a short time.
You can verify whether the converter has been
successfully installed by checking under Start
(Windows logo) -> Control Panel -> System
and Maintenance -> Device Manager. Under
some circumstances, you may be asked by User
Access Control to approve this action. Click ->
Continue. The following entry should appear
without a yellow exclamation mark.
Universal Serial Bus controllers
• USB printer support
The new port must be assigned before you can
use the printer on the USB port. Click Start (Win-
dows Logo) -> Control Panel -> Hardware and
Sound -> Printer. Select your printer, hold down
the right mouse button, and click „Properties"
in the dialog box. Select „USB001 virtual printer
port for USB" in Ports.
Testing the printer: You can check whether the
connection was properly installed in General ->
Print test page.
6
manuals search engine
Installation on Windows Vista 64-bit editions
Because Windows Vista already includes the
necessary drivers, you do not need to install any
drivers separately. After you have inserted the
USB printer converter into your computer and
restarted Vista, the computer recognizes and
installs the converter after a short time.
You can verify whether the converter has been
successfully installed by checking under Start
(Windows logo) -> Control Panel -> System
and Maintenance -> Device Manager. Under
some circumstances, you may be asked by User
Access Control to approve this action. Click ->
Continue. The following entry should appear
without a yellow exclamation mark.
Universal Serial Bus controllers
• USB printer support
The new port must be assigned before you can
use the printer on the USB port. Click Start (Win-
dows Logo) -> Control Panel -> Hardware and
Sound -> Printer. Select your printer, hold down
the right mouse button, and click „Properties"
in the dialog box. Select „USB001 virtual printer
port for USB" in Ports.
Testing the printer: You can check whether the
connection was properly installed in General ->
Print test page.
Installation on Windows XP with Service Pack 2
Preparation:
Ensure that your user account has administrator
rights for Windows XP, otherwise the driver
installation will not be successful.