Hama 00102146 Bedienungsanleitung Seite 10

Downloaded from www.Manualslib.com
Installation on Windows 98 SE:
After the converter is connected, the Hardware
Wizard starts and searches for the driver for
„IEEE 1284 Controller". Click -> Next. In the
next screen (What do you want Windows to
do?), select „Search for the best driver for your
device" -> Next. Now insert the supplied driver
CD. Then select „Specify a location:" and enter
„D:\Usblpt\98se". (You may need to enter the ac-
tual letter of your CD ROM drive) -> Next -> Next.
Windows 98SE then copies the required data
from the driver CD-ROM. Then click „Finish".
You can check whether the converter has been
installed successfully by selecting Start ->
Settings -> Control Panel -> System -> Device
Manager. The following entry should appear
without a yellow exclamation mark:
Universal serial bus controller
• USB printing support
The new port must be assigned before you can
use the printer on the USB port. Click Start ->
Settings -> Control Panel -> Printers. Select
your printer, hold down the right mouse button,
and click „Properties" in the dialog box. Select
„USB001 (Virtual printer port for USB)" in Details
under the option „Print to the following port".
Testing the printer: You can check whether the
connection was properly installed in General ->
Print test page.
Installation on Mac OS X 10.3.x or higher
Because Mac OS X 10.3.x or higher already
includes the necessary drivers, you do not need
to install any drivers separately. After you have
inserted the USB printer converter into your
MAC and restarted MAC OS X, the computer
recognizes and installs the converter after a
short time.
manuals search engine
You can check whether the converter was
installed properly by using the System Profi ler
program. Check in USB to see if the following
entries appear.
USB device tree
• IEEE-1284 Controller
Contact and Support Information
If the product is defective:
Please contact your dealer or Hama Product
Consulting if you have any product claims.
Internet/World Wide Web
Product support, new drivers or product
information are available at:
www.hama.com
Support hotline – Hama Product Consulting:
Tel. +49 (0) 9091 502 115
Fax +49 (0) 9091 502 272
E-mail: produktberatung@hama.de
9