Firmware Update; Factory Settings; Signal Strength (Wifi) - Hama 00062760 Bedienungsanleitung

00062760bda.indd Abs4:21 00062760bda.indd Abs4:21
Downloaded from www.Manualslib.com

4.7 Firmware update

Due to constant further development and improvement of operating software, it is necessary to regularly update the
device software (fi rmware update). To check whether an update is available, take the following steps:
Go to „Confi guration" from the main menu.

4.8 Factory settings

This menu item will reset your Wireless Internet Radio back to the factory settings.
Note: All of the settings you have made will be lost.
If you want to reset the device to the factory settings, proceed as follows: Main menu –> Confi guration –>
Factory settings
4.9 Signal strength (WiFi strength)
As with any other Wireless LAN device, your Wireless Internet Radio can also display the signal strengths of the
current Wireless LAN connection.
If you wish the strength to be displayed, go to:
Main menu –> Confi guration –> WiFi strength
manuals search engine
Then select „FirmwareUpdate". If an update is available, it is
automatically installed. If there is no update available, the Internet Radio
will automatically switch back to the Confi guration menu.
Click „YES" to confi rm your selection. After an automatic restart, the
device will then default to the original factory settings.
The signal strength of the current connection will be displayed as a
percentage.
21
14.01.2008 12:42:57 Uhr 14.01.2008 12:42:57 Uhr