Establishing A Connection; Wireless Lan; Ethernet/Wired Network - Hama 00062760 Bedienungsanleitung

Verfügbare Sprachen

00062760bda.indd Abs4:19

Downloaded from

www.Manualslib.com

4.3 Establishing a connection

Connect the Internet Radio to the existing network using a network cable. After you switch on your Internet Radio,

the connection is automatically established. It is important that there is an active DHCP server in your network. If this

is not the case, you can manually enter the appropriate IP address using the rotary controller or navigation buttons.

The IP address must be in the same address range as that of your router.

manuals search engine

The selection „Suche nach Netzwerken" allows you to search for

existing networks.

If your router is conﬁ gured not to reveal network names, you can

manually enter the name using the „Network names" menu item.

Conﬁ rm your „Suche nach Netzwerken" selection.

The device searches for existing wireless LAN networks.

After the search for networks is ﬁ nished, all available networks are

displayed. Select the appropriate network and conﬁ rm your selection.

If your network is encrypted, you will be asked to enter the key.

Enter the key using the rotary controller or the navigation buttons. Note

that the wireless Internet Radio differentiates between title and

sentence case.

Select „END" after you have ﬁ nished entering the key.

The connection to the network is being established. As soon as the

connection is correctly established, the Internet Radio will change to the

main menu.

14.01.2008 12:42:55 Uhr

Inhaltsverzeichnis