Chapter 2 Installation - ASROCK Q87M vPro Handbuch

Chapter 2 Installation

This is a Micro ATX form factor motherboard. Before you install the motherboard,
study the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard.
• In order to avoid damage from static electricity to the motherboard's components,
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
• When placing screws to secure the motherboard to the chassis, please do not over-
Downloaded from www.Manualslib.com
Failure to do so may cause physical injuries to you and damages to motherboard
components.
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
in the bag that comes with the components.
tighten the screws! Doing so may damage the motherboard.
manuals search engine
13