ASROCK FM2A75M-HD+ Handbuch Seite 22

2.6 Onboard Headers and Connectors
Serial ATA3 Connectors
(SATA_1: see p.1, No. 8)
(SATA_2: see p.1, No. 9)
(SATA_3: see p.1, No. 13)
(SATA_4: see p.1, No. 12)
(SATA_5: see p.1, No. 15)
(SATA_6: see p.1, No. 14)
USB 2.0 Headers
(9-pin USB6_7)
(see p.1 No. 16)
(9-pin USB8_9)
(see p.1 No. 17)
USB 3.0 Header
(19-pin USB3_2_3)
(see p.1 No. 18)
Downloaded from www.Manualslib.com
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
SATA_5
USB_PWR
P-7
P+7
1
P+6
P-6
USB_PWR
USB_PWR
P-9
P+9
1
P+8
P-8
USB_PWR
IntA_P_SSTX+
IntA_P_SSTX-
GN D
IntA_P_SSRX +
IntA_P_SSRX -
Vbu s
Vbu s
IntA_P_SSRX -
IntA_P_SSRX +
GN D
IntA_P_SSTX-
IntA_P_SSTX+
manuals search engine
These six Serial ATA3
(SATA3) connectors support
SATA data cables for internal
storage devices. The current
SATA3 interface allows up to
SATA_6
6.0 Gb/s data transfer rate.
Besides four default USB 2.0
ports on the I/O panel, there
GND
DUMMY
are two USB 2.0 headers on
this motherboard. Each USB 2.0
GND
header can support two USB
2.0 ports.
GND
DUMMY
GND
Besides two default USB 3.0
ID
IntA_P_D +
IntA_P_D -
ports on the I/O panel, there is
GN D
one USB 3.0 header on this
motherboard. This USB 3.0
header can support two USB 3.0
1
ports.
GN D
IntA_P_D -
IntA_P_D +
FM2A75M-HD+
21