Specifications - ibico Thermal Binder 260 Bedienungsanleitung

Thermal Binder 260
Thermal binding operation
Insert the plug into power socket.
1
Turn on the power switch ( I
2
( ) will light up on the operating panel. After heating up
for 10 minutes, the green 'ready indicator' ( ) will light up
with an audible signal. The machine is now ready to bind.
Select a suitable thermal binding cover. Choose a cover
3
with a paper capacity equal or greater than the number of
sheets that you wish to bind. Insert your document into the
thermal cover, ensure that the sheets are neatly aligned.
Place the thermal cover into the heating channel (Picture
4
1) and press the 'Bind' button ( ) (Picture 2). The red
'wait indicator' ( ) will light up, indicating that the
document is being bound. After about 30 seconds, the
'green indicator' will light up & there will be an audible
signal. Remove the cover from the heating channel. Press
the spine together, to spread the glue within the cover.

Specifications

Input Power
Dimension
Weight of Unit
Power Consumption
Preheating Time
Thermal Binding Time
Max. Paper size
Max. Binding Length
Max. Binding Thickness
Guarantee
Operation of this machine is guaranteed for one year from date
of purchase, subject to normal use. Within the guarantee
period, GBC will at its own discretion either repair or replace the
defective machine free of charge. Defects due to misuse or use
for inappropriate purposes are not covered under the guarantee.
Proof of date of purchase will be required. Repairs or alterations
Downloaded from www.Manualslib.com
/
O ) and the red 'wait indicator'
Ibico Thermotronic 260
AC100~120V, 220~240V, 50/60HZ
* Please refer to our indications on the outside
of packing or the label on the bottom of the
machine for correct voltage use
420 x 135 x 155 mm
1120 g
120 W
10 minutes
Approximately 30 seconds
A4
310mm (12.2")
25mm (1")
manuals search engine
CAUTION: the cover will be warm, you may wish to use a
cloth to protect your fingers (Picture 3). Now place the
thermal cover into the cooling channel for 1 minute. This
allows the glue to cool and harden, forming a perfectly
bound document (Picture 4).
With thinner documents, several documents can be bound
5
simultaneously, if required. Simply insert them together in
the heating channel and operate the machine as in steps
3 & 4.
After use turn of the machine and remove the plug from
6
the socket.
Selection of the right sized cover
Spine size
*
made by persons not authorised by GBC will invalidate the
guarantee. It is our aim to ensure that our products perform to
the specifications stated. This guarantee does not affect the legal
rights which consumers have under applicable national legislation
governing the sale of goods.
No. of sheets
mm 80gsm approx.
1.5
3
4
6
8
12
15
20
25
G
10
25
30
50
60
90
100
130
200