Hama 00049061 Bedienungsanleitung Seite 16

Downloaded from www.Manualslib.com
g Operating Instruction
Selecting the type of network component:
In order to make your network card ready for DSL, the PPPoE
network protocol must be installed.
Select Protocol and then click "Add".
Selecting the network protocol:
Windows 2000 does not contain a protocol for DSL by default.
Click the "Have Disk..." button to add the RASPPPoE protocol
that you downloaded earlier.
Specifying the target folder/fi le:
Select the folder where you extracted the *.zip fi le that you
downloaded at the beginning.
Click Open. Windows automatically selects the correct fi le
(RASPPPOE.INF).
manuals search engine
Selecting the network protocol:
Select the PPP over Ethernet Protocol and click "OK".
Confi rming the digital signature:
Windows 2000 uses a digital signature for drivers, protocols and
various other software.
As this protocol does not have a digital signature, the following
message is displayed. Click "Yes" to continue.
After you install the PPP over Ethernet Protocol, restart your
computer.
Running the fi le:
After you restart your computer, go to the folder where you
previously extracted downloaded fi le RASPPPoE.inf.
Run RASPPPoE.exe.
15