Cleaning The Base Unit; Cleaning The Accessories - Lauben Stick Blender 800WT Serie Benutzerhandbuch

1) Connect the mains plug with the wall socket.
2) For chopping, keep the power button B / TURBO C pressed and release it to switch the device off.
3) After chopping remove the mains plug and take the motor unit D away from the drive cover I.
4) Clean the device immediately if possible.
whisk
application area:
The whisk is suitable for beating whipped cream, egg whites and foods of a similar light consistency.
1) Fill the cream, egg whites or similar into the measuring beaker M/N or another suitable container.
2) Immerse the whisk G into the cream or similar.
3) Connect the mains plug with the wall socket.
4) For beating, keep the power button B or TURBO C pressed and release it to switch the device off.
5) After beating pull the mains plug and take the whisk G out of the food.
6) Remove the whisk G from the whisk base H.
7) Clean the device immediately if possible.
CAUTION: Do not use chopper bowl and blender for ice.
Processing table
Function Ingredients
Chopper Beef
Blender Carrots, water
Mashing Potato, butter, milk
Whisk Egg whites
Cleaning
■ Warning! To prevent the risk of electric shock, injury or damage.
■ Disconnect the power supply plug from the mains socket before cleaning.
■ Never immerse the motor unit in water.
■ Caution! Never use scouring, corrosive or abrasive cleaning materials as these could damage the appliance.

Cleaning the base unit

■ Clean the motor unit with a damp cloth. A little detergent may also be used.
■ Wipe over with clean water.
■ Do not use the motor unit again until it is completely dry.

Cleaning the accessories

■ Put the parts in cold or lukewarm water to soften dough residues.
■ Note: You can also add a little detergent to the water.
■ Remove softened dough residues with a washing-up brush.
■ Rinse off with clean water.
■ Allow parts to dry completely before using them again.
Max. quantity
150 g
240 g (carrots), 360 g (water)
1 kg (potato), 80 g (butter),
200 ml (milk)
2 PCS
Processing time Speed
10 sec. TURBO
60 sec. TURBO
90 sec. TURBO
90 sec. TURBO
DE
EN
CZ
SK
PL
HU
| 15