Operating Elements - Lauben Stick Blender 800WT Serie Benutzerhandbuch

rEMOVE tHE aCCESSOry Part
To remove the accessory part, turn the motor unit D such that the attachment marking
the motor unit D from the accessory.

Operating elements

Speed controller: a
The blending speed is adjustable from 1 (minimum) to 6 (maximum speed).
Power button: B
Keep the power button B pressed to work at the set speed. Release it to switch the device off.
turbo button: C
Keep turbo button C pressed for blending at maximum speed. The speed controller setting is irrelevant here. Release turbo button C to
switch the device off.
Blender
application area:
The blender E is ideal for pureeing cooked fruit and vegetables and for mixing drinks, soups, sauces, etc. and for making milkshakes. Do
not use the blender E for extremely hard food such as ice cubes, nuts or the like.
NOTE: Adapt the rotation speed to suit the foodstuff to be blended. Select normal speed for soft foodstuffs to be blended (1-6) B and turbo
speed for harder foodstuffs (TURBO C).
1) Cut the cooked fruit and vegetables into small pieces.
2) Put the food into the measuring beaker M/N or another suitable container.
3) Attach the motor unit D to the blender E until it engages.
4) Immerse the blender into the food to be pureed/mixed.
5) Connect the mains plug with the wall socket.
6) To blend at normal speed, keep the power button B pressed. To blend at turbo speed, keep TURBO C pressed.
7) Move the blender E up and down a bit in the foodstuff, to ensure that it is blended evenly.
8) When you are finished, release the power button B or TURBO C.
9) After blending wait until standstill before you remove the blade, then pull the mains plug and take the blender E out of the food.
10) Clean the device immediately if possible.
NOTE: If the blender E builds up a suction and adheres to the bottom of the vessel, release the power button B or TURBO C briefly.
Mashing
application area:
The mashing potato shaft F is ideal for mashing boiled potatoes, carrots.
1) Cut the cooked potatoes and carrots into small pieces.
DE
2) Put the food into the measuring beaker M/N or another suitable container.
3) Attach the motor unit D to the mashing potato shaft F until it engages.
4) Immerse the blender into the food to be pureed/mixed.
EN
5) Connect the mains plug with the wall socket.
6) To blend at normal speed, keep the power button B pressed. To blend at turbo speed, keep TURBO C pressed.
7) Move the mashing potato shaft F up and down a bit in the foodstuff, to ensure that it is blended evenly.
CZ
8) When you are finished, release the power button B or TURBO C.
9) After blending wait until standstill before you remove the blade, then pull the mains plug and take the mashing potato shaft F out
of the food.
SK
10) Clean the device immediately if possible.
Chopper
PL
application area:
The chopper is ideal for chopping meat, Parmesan, vegetables, fruit, nuts and herbs.
HU
■ Rinse or wash the food.
■ Cut the food into small pieces.
■ Remove the outer shell from nuts. You may use the inner skin if you wish, e.g. with almonds.
■ Use fresh herbs without the stalks and in dry condition.
■ Remove sinews, bones and gristle from the meat.
14 |
points to the unlock marking and pull off