Troubleshooting - SVANE M6000 Anleitung

Features:
Mains voltage: 230 V
Bluetooth®
Stanby power consumption 0.1 W
Under bed light
Soft start/stop
Mechanical emergency lowering
Motor protected against overload
Mrk. The bed can still be damaged if used incorrectly

Troubleshooting:

If you are unable to adjust the bed, please try the following:
– Check whether the plug has been inserted properly into the socket.
– Check that there are batteries in the remote control.
Replace the batteries if they have run out.
– If necessary, remove the plug from the socket and repeat the
procedure described above to reconnect the remote to the beds.
If remote loose connection to motor:
– Unplug cord for 60 sec.
– Reinstall cord.
– When light flashes, push button 1 and 3 simultaneously.
More useful information about your new product,
visit Service at: svane.no / svane.de / svane.ch / svane-senge.dk /
svane.fi / svanebeds.com
Ekornes Beds AS
NO - 1900 Fetsund
Tel. +47 63 88 33 00