From Firmware Bt 5 Build 240 - Telecom Behnke 20-0040-IP Anleitung

2.2.2. from firmware BT 5 Build 240

The corresponding "set parameter" buttons are
used for quick configuration for both appli-
cations. All parameters can be individually
adjusted via the web interface. The "Help"
button in the web front-end offers further
instructions.
www.behnke-online.com
Additional SIP door bell / SIP PA system connection
Configuration and Set-up
*
*Attention:
Have the login information ready to log the
device on to the SIP server. This information is
provided by the SIP server operator.
GB
35