Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
eng
ROLLER'S Multi-Press XL
45 kN 22 V ACC
Rapid charger Li-Ion/Ni-Cd
(Plug-in battery,
Art. No. 571560)
Rapid charger Li-Ion
(Slide-in battery,
Art. No. 571575)
Rapid charger Li-Ion
(Slide-in battery,
Art. No. 571585)
Rapid charger Li-Ion
(Slide-in battery,
Art. No. 571587)
Voltage supply
14.4 V (Art. No. 571565)
Voltage supply
21.6 V (Art. No. 571567)
Voltage supply
21.6 V (Art. No. 571578)
1.6. Dimensions
ROLLER'S Uni-Press SE
ROLLER'S Uni-Press, Uni-Press ACC 370×235×85 mm (14.6"×9.2"×3.3")
ROLLER'S Uni-Press XL ACC
ROLLER'S Multi-Press Mini ACC
ROLLER'S Multi-Press Mini 22 V ACC 273×260×75 mm (10.7"×10.2"×3.0")
ROLLER'S Multi-Press Mini S 22 V ACC
ROLLER'S Multi-Press Mini S 22 V ACC 405×145×75 mm (15.9"×5.7"×3.0")
ROLLER'S Multi-Press Mini S 22 V ACC 405×145×75 mm (15.9"×5.7"×3.0")
ROLLER'S Multi-Press, Multi-Press ACC 338×298×85 mm (13.3"×11.7"×3.3")
Multi-Press, Multi-Press ACC
Multi-Press, Multi-Press ACC 338×298×85 mm (13.3"×11.7"×3.3")
ROLLER'S Multi-Press 22 V ACC
ROLLER'S Multi-Press XL 45 kN 22 V ACC 540×325×85 mm (21.3"×12.8"×3.3")
ROLLER'S Axial-Press 25 22 V ACC
ROLLER'S Axial-Press 25 L 22 V ACC 305×260×75 mm (12.0"×10.2"×3.0")
ROLLER'S Akku-Exparo 22 V ACC
1.7. Weights
ROLLER'S Uni-Press SE drive unit
ROLLER'S Uni-Press / ACC drive unit
ROLLER'S Uni-Press XL ACC
ROLLER'S Multi-Press Mini ACC drive unit without battery 2.1 kg
ROLLER'S Multi-Press Mini 22 V ACC drive unit without
battery
ROLLER'S Multi-Press Mini S 22 V ACC drive unit
without battery
ROLLER'S Multi-Press / ACC drive unit without battery
ROLLER'S Multi-Press 22 V ACC drive unit without battery
ROLLER'S Multi-Press 22 V ACC drive unit without battery 2.8 kg
ROLLER'S Multi-Press 22 V ACC drive unit without battery 2.8 kg
ROLLER'S Multi-Press XL 45 kN 22 V ACC
drive unit without battery
ROLLER'S Axial-Press 25 22 V ACC
drive unit without battery
ROLLER'S Axial-Press 25 L 22 V ACC
drive unit without battery
ROLLER'S Akku-Exparo 22 V ACC
drive unit without battery, without expander device
drive unit without battery, without expander device
drive unit without battery
Expander device Cu (ROLLER'S Akku-Exparo 22 V ACC) 0.3 kg
Expander device P (ROLLER'S Akku-Exparo 22 V ACC)
Expander device P-CEF
(ROLLER'S Akku-Exparo 22 V ACC)
ROLLER'S battery Li-Ion 14.4 V, 1.5 Ah
ROLLER'S battery Li-Ion 14.4 V, 3.0 Ah
ROLLER'S battery Li-Ion 21.6 V, 1.5 Ah
ROLLER'S battery Li-Ion 21.6 V, 2.5 Ah
ROLLER'S battery Li-Ion 21,6 V, 5,0 Ah
ROLLER'S battery Li-Ion 21,6 V, 9,0 Ah
Pressing tongs (average)
Pressing tongs Mini (average)
Pressing heads (pair, average)
ROLLER'S
ROLLER'S expander (average)
ROLLER'S expander (average)
ROLLER'S P-CEF expanding head (average)
ROLLER'S P-CEF expanding head (average)
ROLLER'S
Adapter tongs Z2
Adapter tongs Z4
Adapter tongs Z5
Adapter tongs Z6 XL
21.6 V – ---; 5.0 Ah
21.6 V – ---; 9.0 Ah
Input 220 – 240 V~; 50 – 60 Hz; 65 W
220 – 240 V~; 50 – 60 Hz; 65 W
220 – 240
Output 10.8 – 18 V – ---
all-insulated, interference-suppressed
Input 100 – 120 V~; 50 – 60 Hz; 65 W
100 – 120 V~; 50 – 60 Hz; 65 W
100 – 120
Output 10.8 – 18 V – ---
all-insulated, interference-suppressed
Input 220 – 240 V~; 50 – 60 Hz; 70 W
220 – 240 V~; 50 – 60 Hz; 70 W
220 – 240
– ---
Output 21.6 V
21.6 V
21.6
all-insulated, interference-suppressed
Input 100 – 120 V~; 50 – 60 Hz; 70 W
100 – 120 V~; 50 – 60 Hz; 70 W
100 – 120
– ---
Output 21.6 V
21.6
21.6 V
all-insulated, interference-suppressed
Input 100 – 240 V~; 50 – 60 Hz; 90 W
Output 21.6 V – ---
all-insulated, interference-suppressed
Input 100 – 240 V~; 50 – 60 Hz; 290 W
Output 21.6 V – ---
all-insulated, interference-suppressed
Input 220 – 240 V~; 50 – 60 Hz
220 – 240 V~; 50 – 60 Hz
220 – 240
Output 14.4 V – ---;
– 33 A
– ---;
all-insulated, interference-suppressed
Input 100 – 120 V~; 50 – 60 Hz
100 – 120
100 – 120 V~; 50 – 60 Hz
Output 14.4 V – ---;
– ---;
– 18 A
all-insulated, interference-suppressed
Input 220 – 240 V~; 50 – 60
220 – 240 V~; 50 – 60
220 – 240
Hz
Output 21.6 V – ---; ≤ 15 A
– ---; ≤ 15 A
–
all-insulated, interference-suppressed
Input 220 – 240 V~; 50 – 60 Hz
Output 21.6 V – ---; 40 A
all-insulated, interference-suppressed
430×118×85 mm (16.9"×4.6"×3.3")
525×255×90 mm (20.7" ×10.0"×3.5")
288×260×80 mm (11.3"×10.2"×3.1")
285×290×81 mm (11.2"×11.4"×3.2")
280×260×75 mm (11.0"×10.2"×3.0")
200×250×75 mm (7.9"×9.8"×3.0")
4.7 kg
4.7 kg
5.5 kg
2.1 kg
2.2 kg
3.8 kg
5.7 kg
2.6 kg
2.8 kg
2.0 kg
2.0 kg
0.3 kg
0,3 kg
0.3 kg
0.5 kg
0.4 kg
0.4 kg
0,8 kg
1,1 kg
1.8 kg
1.2 kg
0.3 kg
0.2 kg
0.2 kg
0.2 kg
0.2 kg
2.0 kg
3.6 kg
3.8 kg
5.5 kg
Adapter tongs Z7 XL 45 kN
Pressing ring M54 (PR-3S)
Pressing ring U75 (PR-3B)
1.8. Noise information
Emission at workplace
ROLLER'S Uni-Press SE
ROLLER'S Uni-Press / ACC / XL ACC LpA = 81 dB
Uni-Press / ACC / XL ACC LpA = 81 dB
Uni-Press / ACC / XL ACC
ROLLER'S Multi-Press Mini ACC /
Multi-Press Mini 22 V ACC/
Multi-Press Mini S 22 V ACC
ROLLER'S Multi-Press / ACC / 22 V ACC /
XL 45 kN 22 V ACC
XL 45 kN 22 V ACC
XL 45 kN 22 V ACC
ROLLER'S Axial-Press 25 22 V ACC /
Axial-Press 25 L 22 V ACC
ROLLER'S Akku-Exparo 22 V ACC LpA = 73 dB
1.9. Vibrations
Weighted effective value of acceleration
The specifi ed vibration emission value was measured according to a standard
test method and can be used for comparison with another power tool. The
specifi ed vibration emission value can also be used for an initial estimation of
the cut-out.
CAUTION
CAUTION
The vibration emission value may differ from the specifi ed value during actual
use of the power tool depending on the manner in which the power tool is used.
Dependent upon the actual conditions of use (periodic duty) it may be necessary
to establish safety precautions for the protection of the operator.
2. Preparations for Use
CAUTION
CAUTION
After the drive unit has been in storage for a long period of time, the overpres-
sure valve must be actuated fi rst by pressing the reset button (13) before putting
back into operation. If it is stuck or stiff, it may not be pressed. The drive unit
must be handed over to an authorized ROLLER customer service workshop
for inspection.
CAUTION
CAUTION
Transport weights above 35 kg must be carried by at least 2 persons.
The respective latest sales literature applies for the use of ROLLER'S pressing
tongs, ROLLER'S Mini pressing tongs, ROLLER'S pressing rings with adapter
tongs, ROLLER'S pressing heads and ROLLER'S expanding heads for the
different pipe connection systems, see also www.albert-roller.de → Downloads
→ Product Catalogues, Brochures. If the system manufacturer alters components
of pipe connection systems or markets new ones, their current application
status must be enquired about at ROLLER'S (Fax +49 7151 17 27 - 87 or e-mail
info@albert-roller.de). Subject to change and error.
2.1. Electrical connection
WARNING
WARNING
(10.4 lb)
Note the mains voltage! Before connecting the drive unit, the rapid charger
(10.4 lb)
or the power supply unit, check whether the voltage given on the rating plate
(12.1 lb)
(4.5 lb)
corresponds to the mains voltage. On building sites, in a wet environment,
indoors and outdoors or under similar installation conditions, only operate the
power tool on the mains with a fault current protection switch (FI switch) which
(4.5 lb)
interrupts the power supply as soon as the leakage current to earth exceeds
30 mA for 200 ms.
(4.9 lb)
(8.3 lb)
Rechargeable batteries
(6.2 lb)
(6.2 lb)
NOTICE
(12.6 lb)
Always hold the battery 14.4 V (25) upright when inserting it in the drive unit
or the rapid charger. If inserted at an angle it can cause damage to the contacts
(5.6 lb)
and result in a short circuit which damages the battery.
Total discharging by undervoltage
(6.1 lb)
The Li-Ion batteries may not drop below a minimum voltage because otherwise
the battery could be damaged by "total discharge". The cells of the ROLLER'S
(4.4 lb)
(4.4 lb)
Li-Ion battery are delivered pre-charged to approx. 40 %. Therefore the Li-Ion
(0.7 lb)
batteries must be charged before use and recharged regularly. Failure to observe
(0.7 lb)
this regulation of the cell manufacturer can lead to damage to the Li-Ion battery
by total discharging.
(0,7 lb)
(0.7 lb)
7
7 lb)
Total discharging due to storage
(1.1 lb)
If a relatively low charged Li-Ion battery is stored, self discharging can lead to
(0.9 lb)
total discharge damage of the battery after longer storage. Li-Ion batteries must
(0.9 lb)
therefore be charged before storing and recharged every six months at the
(1,8 lb)
latest and charged again before use.
(2,4 lb)
NOTICE
(3.9 lb)
Charge the battery before use. Recharge Li-Ion batteries regularly to avoid
(2.6 lb)
their total discharge. The rechargeable battery will be damaged by total
(0.7 lb)
7 lb)
7
discharge.
(0.4 lb)
(0.4 lb)
(0.4 lb)
(0.4 lb)
Only use approved ROLLER'S rapid chargers for charging the ROLLER'S
(4.4 lb)
battery, see Guidelines for use, fi g. 20. New Li-Ion batteries and Li-Ion batteries
(7.9 lb)
which have not been used for a long time only reach full capacity after several
(8.4 lb)
charges.
(12.1 lb)
eng
5.5 kg
(12.1 lb)
3.1 kg
(6.8 lb)
2.7 kg
(5.9 lb)
LpA = 76 dB
LWA = 87 dB K = 3 dB
LWA = 92 dB K = 3 dB
LWA = 92 dB K = 3 dB
LpA = 73 dB
LWA = 84 dB K = 3 dB
LpA = 74 dB
LpA = 74 dB
LWA = 85 dB K = 3 dB
LWA = 85 dB K = 3 dB
LpA = 73 dB
LWA = 84 dB K = 3 dB
LWA = 84 dB K = 3 dB
< 2.5 m/s² K = 1.5 m/s²
8
8 lb)
19
Werbung
Inhaltsverzeichnis
