System Connections - auna multimedia UHF200C-HB Bedienungsanleitung

Antenna: Transmits the RF signal of the transmitter.
1
2 Information screen: Displays information from the transmitter.
On/Off: Turns the transmitter on/off.
3
Battery Cover: Rotate clockwise to close and counterclockwise to open.
4
Input Connector: Connector for clip microphones and headsets.
5
IR: Remote control receiver.
6

SYSTEM CONNECTIONS

Receiver
Plug the power adapter connector into the DC connector on the back of the
receiver. Plug the mains adapter into a 220 V ~ 50 Hz socket.
Antenna
Make sure that the antenna angle, seen from the vertical line (see
illustration), is 45 degrees.
EN
21